1: Turn off the power and check all hydraulic lines and fittings. Whether the pipe is damaged or if the joint is loose, all joints must be tightened.
2: Remove and disassemble the lowering valve, blow the net with compressed air, and then put it in and re-install it.
3: Put the hydraulic oil out, tighten the joint and take out the oil filter. After cleaning, clean it with compressed air, put it back in the tank, and connect the pipeline.
4: Replace with new oil and do not use old oil intermittently. Otherwise, moving parts in the system will accelerate wear.
5: Clean the dust on the platform of the hydraulic lifting platform to avoid short circuit or leakage. After use, it was found that the oil of the hydraulic oil is darkened, the oil is sticky, or the oil contains gravel and other foreign matter, and should be replaced.
6, aluminum alloy elevator check roller, intermediate shaft and bearing, cylinder pin and bearing, arm hinge axis and bearing wear.
Flexible Diamond Sandings Discs and Metal Bond Nickel Discs are used for the grinding stage, giving high stock removal and a consistent, predictable finish. These Nickel bonded discs are used in combination with magentic Bond discs for the final polishing stages.Flexible supplies a full complement of large discs for all glass applications.Flexible Diamond Discs for Glass from ø150mm for artistic glass to ø600mm and above for robotic polishing of crystal and glass.may be run wet or dry.
Provides aggressive cutting for hard-to-grind material,Open-dot abrasive pattern ,discourages loading Abrasive construction provides durability and long life, allows conformance to contours,perfect for flat or curved surfaces,Flexible diamond flat lapping discs can be supplied with various quick change options including QRS, different adhesives, magnetic and rigid combinations for grinding, polishing and lapping natural and synthetic stones, glass, ceramics and hard materials. Colour coded for easy grade identification.
Flexible supplies a complete range of Metallography diamond discs can offer expert advice on how to utilise fixed diamond abrasives to improve production cycle times.which can grind and polish much faster than a diamond slurry system.
Flexible Diamond Sandings Discs
Flexible Diamond Sandings Discs,Flexible Diamond Sandings Pad,Diamond Sanding Disk,Diamond Abrasive Pad,Diamond Abrasive Disc,Semi-Flexible Diamond Sanding Pad,Diamond Sanding Discs and Kits,Diamond Sanding Pads for Glass,Diamond Grit Sanding Pads
Hans Superabrasive Material Co., Ltd. , http://www.hansuperabrasive.com