For the friends of the decoration, we are all familiar with the tiles. Now there are many ways to tiling. Everyone knows how to paste them. Have we heard of using glue to tiling? So what glue is used for wall tiles? Many people are entangled in these small details. Today, Xiaobian will come with you to see what kind of glue and wall tiles are used for wall tiles. I hope that you can help you with the purchase of tile glue.
What glue is used for wall tiles?
1, ordinary type of tile adhesive. Ordinary tile adhesive is suitable for pasting various ceramic tiles of ordinary mortar surface or small bricks of wall.
2. Enhanced tile adhesive. It has a strong adhesion and anti-dropping force, and can play a good role in the adhesion of wall tiles and non-mortar surfaces that require a relatively large bonding force, such as wood.
3, heavy brick tile adhesive. This type of glue has a large adhesive force and is flexible and can withstand the stress caused by thermal expansion and contraction of the adhesive layer. It can be used for gypsum board, fiberboard, splint or old veneer. Paste of stone plate.
Need to pay attention to the purchase of glue:
1. At the time of construction trimming, we must pay attention to not excessive extrusion, otherwise it will easily cause deformation of the foam rod of the liner.
2. During the construction, within the scope permitted by the construction, it is necessary to extend the correction time as much as possible, and correct it while operating. Use a scraper to trim the lower end of the wall tile, so as to avoid uneven surface and a small amount of the cured strip. Drooping.
3, because the various wall tiles in the market are not the same glue, it is recommended that we use the simple adhesion test before using each batch of glue, which can also guarantee the quality of the project and its own interests.
Method of tiling:
1, ground treatment
Ground treatment is required before laying the floor tiles, and the level of measurement must be completed, so that the slope of the ground can be understood, and the effect of the paving can be better controlled. Then determine the number of tiles needed for each row and column based on floor area and floor tile size.
2, laying cement mortar
After the ground treatment is completed, it is necessary to lay a layer of mortar on the ground. The ratio of mortar to water is 3:1, forming a semi-dry layer. Fill the surface with a shovel and a plastering knife. The thickness of the mortar is 3-4 cm. .
3, evenly spread
After smoothing the mortar, apply it to the back of the floor tile with a cement mortar diluted to a 1:1 ratio, and then evenly spread it on the ground on which the mortar is pre-laid. After confirming that the tiles are evenly laid, you can proceed to the next step.
4, trimming the seam
Use the rubber hammer and level to check the hollowing and flatness of the floor tiles. After the entire floor is finished, confirm that the color and texture are correct, the caulking agent can be used for the next day.
In fact, the brand of tile adhesive on the market is still quite a lot. As a brand product, the quality is easier to guarantee. Therefore, understanding the brand products can also ensure the peace of mind of users. The above is the way Xiaobian used to introduce the glue and wall tiles for the wall tiles. The end is here. For more information, please continue to pay attention to the decoration home.
More related wonderful reading:
What is the most solid glue for wall tiles? How to choose firm wall glue
What glue is used for wall tiles? What are the types of wall tile glue?
Magnetic Pot Magnet Round Base are ceramic or neodymium magnets clad with a steel cup. Magnetic strength can be multiplied with the block of the steel cup, These magnets are often found in applications requiring a strong holding device or the ability to attach a post or hook to hang inspection equipment, indicator gauges, lamps, signs, antennas and other items.
The steel cup outside the magnet will protect the magnet from the direct impact when meet other iron or steel things, also, these steel cup will protect the magnet form corrosion of the outdoor humid environment.
The Rubber Magnet Base is made of small Neodymium Magnet discs, steel,and rubber, these magnet discs will effect the magnetic loop with each other and spread out, the steel plate will block and enlarge the magnetism of these magnet discs,the rubber that cover the magnets and steel plate will protect the magnet from impact and corrosion. rubber magnet base is a amazing invent with great help.
Magnetic pot magnet round base are very long of using life, they can keep their magnetism for more than 10 years in the outdoor humid hot environment. Over 15 years in the indoor environment.
Pot Magnet Round Base
Pot Magnet Round Base,Round Base Magnet,Pot Magnetic Base,Rubber Magnet Base
NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com