Today, wood flooring is popular, many owners have renewed interest in classical tiles. Tiles are more bright and tidy than wooden floors, and have an irreplaceable advantage for modern people who like simple style. How to paste tiles ? Next, the decoration home network Xiaobian will introduce to you how to paste the tiles and tile precautions, I hope this article can bring you some help and reference, let us look at it!
How to apply a tile
1. There is no special requirement in the home decoration. Cement is commonly used in cement No. 325. The quality of cement within one month of the factory can be guaranteed.
2. The ratio of cement to sand is 1:3.
3, the choice of sand: the wall tiles should be used for silt, powder wall, wall, sealing seed tank to use Zhongsha. Use coarse sand for paving tiles.
How to paste the two tiles
1. The first thing before paving the floor tiles is to pre-arrange according to the size and floor size of the bricks you buy.
2, pre-arranged planning, but also to pull the two baselines vertically and horizontally, with the baseline, to ensure that the floor tiles of this room are properly aligned.
3, the principle of pre-arrangement is that in the same room, the horizontal longitudinal half brick can not be higher than a line, and half of the brick should be left in the future to put furniture on the side or inconspicuous place.
4. To check whether the reference line is standardized, and measure 1.6 meters point and 1.2 meter point along the staggered point. If the distance between the two points is 2.0 meters, it means that the reference line is vertical and standard, and you can start to paste. Bricks.
5. Paving the first reference brick along this baseline, then the tiles on the back along the baseline will be vertical and vertical, without pulling or inaccurately pulling the wire, it is difficult to reach the expected result.
How to paste the three tiles
1. Brush the mud and water with a ratio of cement and water of 0.4--0.5 on the ground, and then lay a 1:3 mortar.
2, the mortar should be dry and damp moderate, the standard is "hand grip into the ball, landing fried flowers", the mortar is laid flat.
3. Lay the floor tiles on the mortar and beat them with a rubber hammer to level the first reference brick.
4. After the tapping is strict, pick up the tiles and see if the mortar has any lack of slurry or irregularity. Sprinkle the mortar to fill it up.
5, the second time the tile is laid, beaten to the level and the benchmark brick.
6. Pick up the tile for the second time to check if the ground mortar is full and there are no loopholes. If it is full and peaceful, apply a layer of mud on the tile.
7, the third time the bricks are laid, beaten and sturdy, and the benchmark bricks are flush.
8. Use a level ruler to check if the tile is level and tap it with a rubber mallet until it is level.
9. Use a scraper to draw a piece from the middle of the brick joint to ensure that there are some well-balanced cracks between the brick and the brick to prevent the thermal expansion and contraction from causing damage to the brick. Use a scraper to draw back and forth on the two bricks to detect two bricks. Whether it is flush.
The above is the introduction of how to put the tiles on the decoration home network Xiaobian, I hope to bring some help to everyone, I do not know if you are satisfied with the introduction of Xiaobian? If you still need more information, please continue to pay attention to our home encyclopedia!
More related wonderful reading:
How to affix the exterior wall tiles? Precautions for the use of exterior wall tiles
How to paste tiles? Exterior wall tiling process
Product Description about Forehead Thermometer
Theory: Forehead Thermometer
Material: Plastic
Usage: Medical/Household
Feature: Infrared
Business Type: Manufacturer
Service: OEM
Packing Type: Gift Box
Certificate: FDA, CE, ISO9001, ISO13485
Infrared Digit Forehead Thermometer FT-100D
Details about Forehead Thermometer
1. Multiple USE: A. Forehead temperature measuring; B. Object temperature measuring; C. Room termperature measuring2. Display Range & Accuracy:
A. Forehead temperature: 32º C-42.9º C, ± 0.3º C;
B. Object temperature: 0º C-60º C, ± 1º C;
C. Room temperature: 0º C-40º C, ± 0.5º C
3. Mini scale: 0.1º C
4. Measuring time: ≤ 1 s
5. Operation environment: (10-40)º C, (10%-85%)RH
6. Measuring distance: 1cm-3cm
7. Reading store: 32 memories
8. Battery: 3.0V (AAA*2)
9. Auto shut-down: 1 minute
10. Unit weight: 65 g
11 Size: 158× 45× 35mm
12 ° C / ° F switchable
13 Three colors Backlight display for different temperature range
14voice broadcast
Forehead Thermometer
Temporal Thermometer,Best Forehead Thermometer,Infrared Forehead Thermometer,Baby Forehead Thermometer
Dongguan Smart Furniture Co.,Ltd , https://www.smtfurniture.com