In addition to the bathroom cabinet, there is also an important item in the bathroom, that is, the towel rack, the bathroom towel rack can be placed on the towel, or the facial cleanser, hand cream, body lotion, shampoo, conditioner, etc., bathroom towel The use of the rack makes it very convenient for everyone to wash in the bathroom. Then let Xiaobian take everyone to look at the relevant contents of the bathroom towel rack .
First, the towel rack fixed installation steps
1. First of all, we must choose the type of installation of the towel rack. One type is punch-free, which requires the use of adhesives such as glass glue, or the type of suction cup. This installation is relatively simple;
2. When installing this, just apply the glass glue to the place where you need to paste it, then stick it on the wall, use tape to fix it, you can use it in a day or so. If it is easier to suck the cup, just open the suction cup and then suck the wall. It is ok, it is best to use a hair dryer before baking;
3. If it is a little troublesome to install, then you need to measure the distance of each screw hole first, then drill the hole with the electric drill on the wall;
4. Insert the expansion tube into the air, then hit it with a hammer. It should not be higher than the plane of the wall. Then put the assembled towel rack up and tighten the screws to ensure that the screws do not shake.
5. If there is shaking, you can use the glass glue to fix it, put glue on the edge of the towel rack, and put it in a day or so, you can use it.
6. If the towel rack you bought is not stainless steel, it is not recommended to glue the iron, because if the rust needs to be replaced, it is more difficult to remove, but if there is glass, it must be fixed twice.
Second, the height of the bathroom towel rack is generally installed
The towel ring height is 900-1400mm;
The towel bar is 1100-1200mm from the ground;
The single-bar towel rack is generally about 1.5 meters away from the ground;
The distance between the lowermost end of the towel rack base and the sinking table is 55 cm;
The bathtub towel rack is installed above the bathtub, generally opposite the faucet, and is 1600mm above the ground;
Third, matters needing attention
(1) The general towel rack is installed with a standard height, but many home designed towel rack heights can be determined according to their actual needs;
(2) There are many types of towel racks, and the height of the special file rack installation may also be different afterwards;
(3) It is recommended to install the towel rack on an empty wall in the center of the bathroom.
How about, read the relevant introduction to the bathroom towel rack above, did you understand the contents of many bathroom towel racks. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
What are the bathroom towel rack materials? Bathroom towel rack installation
How to install a bathroom towel rack? How is the installation height determined?
How to choose a bathroom towel rack? Bathroom towel rack installation height
Glitter Powder(flake).is widely applied in Textile printing, Christmas ornament, industrial arts, plastic products, stationery sports goods, shoe material, construction decoration materials, synthetic Leather industries, greeting cards, glasswork, cosmetics and coating etc. We have several specification(different particle size) for your choice, 1/8", 1/10', 1/12', 1/24', 1/32...
Glitter Powder, Nail Glitter Powder, Nail Glitter, Bulk Glitter
Dynasty Chemicals (NingBo) Co., Ltd. , https://www.dychemco.com