Wooden furniture is more popular in people's furniture purchases. As we know, the unique existence of wood itself, most of them seem too maverick, and the craftsmen in order to continuation of the meaning of wood life. They are made of exquisite wooden furniture, which can be both life products and crafts. Maybe your home has some wooden furniture to buy, then you know how to properly maintain wooden furniture? Today GO Jiaju teaches everyone how to maintain wooden furniture - wax it and check it out!
Why wood furniture is waxed
The purpose of wood waxing is to protect the wood as early as possible, form a protective film, isolate the wood and dirt, avoid these dirt from directly contacting the wood, and even penetrate into the interior of the paint, making it difficult to clean in the future. Through continuous wood waxing, a gradual “oil board†is formed to keep the moisture in the wood from leaking, resulting in dry cracking, and no absorption resulting in expansion, so as to keep the wood from deformation and cracking; the surface paint maintains proper grease even if there is sunlight Direct color does not change. Improve the wood light, maintain the wood elasticity, the effect is better than once again. After a long time of wood, it will be found that the surface will be a little worn or even black, wooden protection, waxing is a routine maintenance. The main role of wood waxing is to maintain and protect wood, while increasing the brightness of the wood, beautiful.
How to Wax Wooden Furniture First, it is necessary to evenly coat the wax. Brushes can be used to draw wax. Common brush brushes are available. This is to do a good job of waxing, just like building a house. Whether this layer is good or bad is important for the protection of the entire furniture.
Second, it is to wait until the furniture is evenly spread evenly on the surface, and then the furniture surface is heated properly so that the wax spreads evenly. In this process, a hot air gun is needed, but when using a hot air gun, the temperature cannot be too high.
Third, it is hot wax. In this process, the temperature is small, and the amount of wax used must also be controlled. During the heating process, the wax is opened so that the wax slowly penetrates into the material of the furniture.
Fourth, it is waxing. In this process, it is necessary to use a traditional tool made of horns, that is, wax shovels commonly known as wax drivers. In this step, the wax floating on the surface of the wooden furniture should be shovelled. In uneven places, you can also wipe with sandpaper. The waxier the net, the finer and smoother the surface feels.
Fifth, it is rubbed wax. When rubbing wax, it is necessary to use a small coarse cloth or pure cotton cloth, rub along the direction of the furniture texture, the speed should be appropriate. The purpose of rubbing the wax is to remove the clean wax from the surface of the furniture so as to make the surface of the furniture feel intuitive and to rub the wax so that the surface cannot feel sticky.
The last step is to shake the wax. Wax waxing, using a bristle brush, is generally a board brush of 7-8 cm wide, 12-15 cm long and with good hardness black bristle. Waxing wax can clean all parts of the furniture surface. This is the last step and it is done well. The surface gloss can be reflected. Remember, after applying wax to furniture, avoid hot and boiled water.
The above is a method that the furniture network Xiaobian tells everyone about why wooden furniture should be waxed and waxed wooden furniture . I hope to be helpful to everyone. If you like, you can pay attention to our GO Home Information Channel, more and more interesting. Furniture information is waiting for you!
related articles
What solid wood furniture material is what material is good
How to choose the advantages and disadvantages of the wooden bed plank bed
What is the difference between solid wood and wood? What are the advantages of solid wood and wood?
What types of mahogany redwood species are ranked briefly
2. Specifications:
|
Item |
Index |
|
Appearance |
Brown beige liquid |
|
Solid content |
30%±2 |
|
Viscosity |
≤30 |
|
pH |
3-5 |
|
Density |
1.02-1.1g/cm³ |
|
Ionic |
cationic |
|
Flash Point |
> 200℃Auto Ignition Temp |
4. Use Method:
The product is weak cationic, it can be used with cation and nonionic additive, such as cationic starch,basic dye and polyvinyl alcohol etc, but cannot be mix used with additive of strong cation.
The consumption of the product depends on the quality of base paper, internal sizing and size resistance. It is usually 0.5-2.5% of oven dry weight.
5. Package and storage:
200KG or 1000KG plastic drums.
The storage period is 6 months below the temperature 5-35℃,keep away from sunlight and frost.
Styrene Acrylic Copolymer,Cationic Styrene Acrylic Copolymer,Anionic Styrene Acrylic Copolymer,Sizing Agent For Corrugated Paper
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com