In many modern homes, wood flooring is becoming more and more popular because of its comfortable feet, environmental protection and health. Even some families change the style of decoration in order to match the wooden floor. It can be seen that the wooden floor has gradually penetrated into the hearts of the people. Among them, the installation of wooden floor is a very important link, and the quality of the installation seriously affects the quality after living. Then, how to install the wooden floor ? What should you pay attention to when installing the wooden floor ? Let's follow the decoration of the decoration home to learn about it!
1. Before installing the wooden floor, keep the ground level and dry and clear all the debris on the ground.
    2. It should be noted that the installation of the wooden floor must be carried out after the completion of other renovation works.
Wood floor installation step two: laying keel
    1. In the opposite direction of the laying of the wooden floor, the paving line of the keel is popped up, and the electric hammer is used to drill the eye at a distance of 30 cm.
2. The keel must be kept dry and the moisture content should not exceed 15%. Never use cement for heaping. The uneven keel must be leveled with a special thread for the anti-loose dragon to ensure that the keel is flat and firm before it can be laid.
3, in the surrounding and central part of the wooden keel, put some wood floor special anti-caries agent for pest control, but also lay a layer of moisture-proof film on the wooden keel, in order to prevent the wooden floor from moisture deformation, pay attention to the interface at the moisture-proof film Stack 10cm.
    Wood floor installation step three: try to install wooden floor
1. Because the wood floor material is natural, there will be differences in color and texture. Therefore, it is generally necessary to carry out the overall test shop before installation, and adjust the color difference according to the texture and color of the wooden floor to make the overall paving effect more natural. harmonious.
    2. For wooden floors that need to be edged or staggered, they should be matched in advance to make full use of materials to reduce losses.
   1. Because the wooden floor is easily affected by climatic factors such as humidity and temperature during use, it will be slightly swelled. When installing the wooden floor, it is necessary to reserve expansion joints according to the climatic conditions of different regions.
2. When installing, leave a 10mm expansion joint around the corner of the corner. Fix each floor diagonally 45° on the keel with floor nails.
3. If the area is particularly wet, when installing the floor, try not to be too tight between the adjacent two floors to avoid moisture deformation. In dry climates, the natural integration between the floors is subject to change.
    4. If the installation distance of the wooden floor is too long, the northern area is larger than 8m, and the southern area is larger than 6m. It is better to add a bridge partition.
5. At the interface between the room and the hall, the wooden floor should be disconnected, and a 10-12 mm expansion joint should be left, and the connection bar should be used for connection.
    The installation of the wooden floor seems simple, and in fact every detail is crucial during the installation process. Only after every detail is grasped can we guarantee the quality after living!
The above is the decoration home decoration network Xiaobian brings you the relevant knowledge about the installation of wooden floor , hope to help your life! Want to know more related knowledge and life skills, please visit the decoration home Decoration network!
This classification including European Standard Square Hollow Section, mainly EN10219 and EN10210 products, usually they are used for contruction purpose, also some customer use them for car , billbord, stents, fence etc.
Jinan Xin Jiyuan is specialized in ERW and
Seamless square&rectangular tube/pipe, hollow section structure pipe, and
galvanized pipe in China. Annual output reaches 1.5 million tons. We have 2 production
lines, could producte square pipe from 20*20*1mm to 600*600*35mm, rectangular
pipe from 20*30*1.2mm to 600*800*35mm. Xin Jiyuan can manufacture square
rectangular pipes as per the standards of ASTM A500, JIS G3466, EN10219, EN10210,DIN2240,
BS1387, AS1163. Steel
Grade: A500 GR.A/B/C/D, SS400, STKR490, S355JR, S275JO, S275J2, S355J0, S355J2,
C350, C350 L0 ect.
We
have three heat treament furance, two furnace of 100 mt, and one furnace of
300mt, that means we could finsih 500mt goods at the same time.
European Standard Square Hollow Section
European Standard Square Hollow Section,European Standard Hollow Section,Hollow Section Square Pipe,European Standard Seamless Hollow Section
JINAN XIN JIYUAN SPECIAL SECTION TUBE CO., LTD. , https://www.squarepipes.com