Part of the carpentry depicts the five features of the house. If the facial features are not correct, the beauty does not matter. For carpentry construction, you need to pay attention to the following points:
1. Material must be real materials, not shoddy, strictly according to the budget, drawings.
2. All new brick walls and * bathroom wall to do wood ornaments, such as wardrobes, modeling wall surface, must be brushed on the brick wall and plywood respectively after two moisture-proof paint before the next process.
3. To make wooden ornaments on the original wall, such as door covers, window covers, and skirtings, etc., a layer of moisture-proof paper must be applied.
4. When solid wood lines and veneers are on the same line of sight, they must be harmonized in color and have a relative texture.
5. Solid wood door line, window cover line, Taiwan mouth line, close mouth line and veneer panel must close, firm and flat.
6. The furniture door, the inner side of the wardrobe, the drawer wall, and the dark side of the door must be closed with flat wooden wire (except for non-lining panels).
7. Furniture, wooden doors, foot lines, ceilings, and floors all have strict operating standards.
Furniture: Use 18% wood board as furniture frame, 5 PCT board as back board, 12% wood board as drawer wall, 5 PCT board as drawer bottom board.
Wooden door: Use fir sliver plus double-sided 9 PCT board and double-sided decorative panel to make the door, the thickness can't be less than 4 centimeters. Base line: Use 15 pcs. wood panels plus decorative panels and wood lines to make the base line.
Ceiling: Paper gypsum board ceiling is made of wood keel and fixed with high quality (Jin billion) screws. Flooring: The mantle must be flushed, with a center-to-center spacing of 24.4 centimeters (except for the plywood floor), and floor pegs must be fixed on the pine keel.
8. The ceiling of the aluminum buckle plate of the kitchen and the bathroom must use the wooden frame as the base layer.
9. No less than 3 screws in the drawer rolling path. One hole and one screw in the hinge, hinge and other hardware must not be less.
10. Adornment panel, nail solid wood lines, glue can not be used less, but can not use.
11. Be sure to use a paper gypsum cover for partitions or ceilings. When encountering walls, columns, and beams, it is best to use outsourcing. Gypsum board wall must be lined with two layers of sound insulation cotton.
Decoration Carpentry knowledge Living room Ceiling Aisle Ceiling Furniture Wood Doors & Windows House Paint Wall cabinets Floor tiles Chests of drawers Kitchen Doors Toilet ceilings Bathroom doors
The 1000w Led Grow Light is a powerful lighting system designed to provide maximum light coverage for marijuana. With its full-spectrum and spider-like 8 bars design, the 1000 watt LED Grow Light ensures a balanced spectrum and even light for plants. Efficient Samsung LEDs used to maximize efficiency and long lifespan. It's a great LED grow light for marijuana growing, as it produces a higher intensity of light that is essential for the growth of this plant.
With its energy-saving design, the Samsung LED Grow Light 1000w is the perfect choice for your indoor horticulture needs.Energy saving. And it's easy to install, patent snap design, Very saving shipping cost than any other kinds of folding Grow Lights. But may cost a little labour cost. So if you have small growing room, it's better to choice the spider grow lights 1000w. If you have a large commercial growing, it's better to have our foldable grow lights. There are 4x8 4x10ft grow lights available now.
1000W Led Grow Light, Led Grow Light 1000 Watt, Grow Light For Marijuana, Samsung Led Grow Lights
GuangDong One World High-tech Co., Ltd. , https://www.mkdlights.com