After the solid wood floor is laid, it must be used for at least 24 hours before it can be used, otherwise it will affect the use of solid wood flooring. General solid wood flooring poor water resistance, should not use wet cloth or water to wipe, so as not to lose luster. In the following daily life, solid wood flooring must be maintained. The specific measures are as follows:
In everyday use, care should be taken to avoid scratching the floor with hard objects such as heavy metal sharps, glass tiles, and spikes; move the furniture without dragging on the floor surface; do not expose the floor to an open fire or directly place high-power electric heat on the floor. Devices; strong acidic and alkaline substances are forbidden on the floor; long-term flooding is strictly prohibited.
If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. When it is hot and humid, you can drive in an air conditioner or an electric fan.
The humidity in the room should not be too large. Keep the floor dry and clean. Use a wrung cotton mop for daily cleaning: In case of stubborn stains. Wipe with a neutral cleaning solvent and then wipe with a wrung cotton mop. Never use organic solvents such as acids, alkaline solvents, or gasoline to scrub.
In order to maintain the aesthetic appearance of the floor and extend the life of the paint. It is recommended to wax twice a year for maintenance. Wipe the floor clean before waxing, then smear a layer of floor wax evenly on the surface, dry it slightly and wipe it with a soft cloth. Until smooth and bright.
If large-scale flooding occurs or water is partially immersed in water for a long time, clear water should be promptly dried with a dry cloth and allowed to dry naturally. Drying with an electric heater or exposure to sunlight is strictly forbidden.
Exposure to strong sunlight for a long time, or sudden temperature fluctuations in the room, may cause premature aging of solid wood floor finishes and should be avoided as much as possible.
If the installation is completed, it will not be able to stay. To maintain the circulation of indoor air, do not cover it with plastic paper or newspapers, so as to avoid long-term surface paint film sticky and lose luster.
Clean the floor regularly, vacuuming, and prevent sand or frictional dust from accumulating to scratch the floor surface. A doormat may be placed outside the door to prevent sand or frictional dust from being carried into the room. Clean the floor with a dry cotton mop. Do not wipe the floor with a wet mop or a corrosive liquid such as soapy water or petrol.
In order to increase indoor air humidity in autumn and winter seasons, humidifiers can be used to keep indoor air humidity between 50% and 70%. When moving furniture, it should not be pushed or pulled directly on the floor. It should be lifted and moved gently. Furniture that moves frequently can have a rubber on the bottom. Special stains cleaning methods: Oil stains, paints, inks can be wiped with special oil; if it is blood stains, juices, wine, beer and other residual stains can be wiped with a damp cloth or with a rag on the amount of floor cleaner, not strong Acid and alkali liquids clean wooden floors.
In everyday use, care should be taken to avoid scratching the floor with hard objects such as heavy metal sharps, glass tiles, and spikes; move the furniture without dragging on the floor surface; do not expose the floor to an open fire or directly place high-power electric heat on the floor. Devices; strong acidic and alkaline substances are forbidden on the floor; long-term flooding is strictly prohibited.
If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. When it is hot and humid, you can drive in an air conditioner or an electric fan.
The humidity in the room should not be too large. Keep the floor dry and clean. Use a wrung cotton mop for daily cleaning: In case of stubborn stains. Wipe with a neutral cleaning solvent and then wipe with a wrung cotton mop. Never use organic solvents such as acids, alkaline solvents, or gasoline to scrub.
In order to maintain the aesthetic appearance of the floor and extend the life of the paint. It is recommended to wax twice a year for maintenance. Wipe the floor clean before waxing, then smear a layer of floor wax evenly on the surface, dry it slightly and wipe it with a soft cloth. Until smooth and bright.
If large-scale flooding occurs or water is partially immersed in water for a long time, clear water should be promptly dried with a dry cloth and allowed to dry naturally. Drying with an electric heater or exposure to sunlight is strictly forbidden.
Exposure to strong sunlight for a long time, or sudden temperature fluctuations in the room, may cause premature aging of solid wood floor finishes and should be avoided as much as possible.
If the installation is completed, it will not be able to stay. To maintain the circulation of indoor air, do not cover it with plastic paper or newspapers, so as to avoid long-term surface paint film sticky and lose luster.
Clean the floor regularly, vacuuming, and prevent sand or frictional dust from accumulating to scratch the floor surface. A doormat may be placed outside the door to prevent sand or frictional dust from being carried into the room. Clean the floor with a dry cotton mop. Do not wipe the floor with a wet mop or a corrosive liquid such as soapy water or petrol.
In order to increase indoor air humidity in autumn and winter seasons, humidifiers can be used to keep indoor air humidity between 50% and 70%. When moving furniture, it should not be pushed or pulled directly on the floor. It should be lifted and moved gently. Furniture that moves frequently can have a rubber on the bottom. Special stains cleaning methods: Oil stains, paints, inks can be wiped with special oil; if it is blood stains, juices, wine, beer and other residual stains can be wiped with a damp cloth or with a rag on the amount of floor cleaner, not strong Acid and alkali liquids clean wooden floors.
Fastener(Non-s)
Fastener,CNC Screw,CNC Bolt,CNC Nut,CNC Parts
Chongqing Henghui Precision Mold Co., Ltd , https://www.citool.com