1. In the process of using the wing gate, the cardholder shall use the card outside the yellow line. Do not stand by the infrared alarm of the wing gate to swipe the card. When the gate of the wing gate is opened to a certain degree and there is an indication of the arrow, Can enter, it is best not to stay in it, to improve and improve the fluency of the channel.
2. The cardholder should not fold or alter the card, or change the card and magnetic items together to avoid invalidation of the card. When the card is lost, it must be timely contacted with the management department to re-register to avoid information leakage.
3, cardholders swipe in the induction area, not too high, so as not to sensor, do not stick to the proximity card, right is to hold the card, just above the induction area, put the card from the top down, from the induction area 20- 50mm is the best. Hear a “drop†sound to prove that he has successfully swiped the card.
4. Someone in front of the credit card is in the process of passing through, and the person behind must not enter the wing gate channel.
5, wing gate is also need to go to carry out maintenance, do not think that it is a panacea, regular internal and external dust of the chassis to ensure the normal operation of the equipment.
6, if the wing gate is used outdoors, in the case of heavy rain and wind, please immediately stop using electricity. After the rain stops, please open the door of the chassis and let the inside of the chassis be ventilated. After the steam inside the chassis is air-dried, use it after power-on. When the machine is deactivated for a long time, the door of the chassis must be opened and ventilated when it needs to be used again. Otherwise, the steam inside the chassis will cause a short circuit at the moment of power on.
More attention please call Shenzhen Tongdazhi Technology Co., Ltd. staff to inform the detailed usage and precautions.
Plastic Coated Composite Pipe
Plastic coated composite pipe is on the inner wall of the steel melts to dissolve a thickness of 0.5 ~ 1.0 mm layer of polyethylene (PE) resin, ethylene - acrylic acid copolymer (EAA), epoxy (EP) powder, non-toxic polypropylene (PP) or non-toxic polyvinyl chloride (PVC) and other organic matter and constitute a steel-plastic composite pipe material.
Advantage
Plastic coated composite steel pipe is protected by plastic coating both inside and outside. In the middle, it is used to strengthen the composite structure of welded steel pipe or seamless pressure steel pipe, which overcomes the defects of easy rust, corrosion, high pollution, low strength and deformation of plastic pipe, and integrates the common advantages of steel pipe and plastic products. it not only has steel tube high strength, easy connection, water resistance and other advantages, also overcomes the steel easy to corrosion, under the influence of water pollution, scale and strength of plastic pipe is not high, poor fire performance shortcomings, design life of 50 years.
Packaging Details
Plastic caps on both ends, Steel bundle, Woven bag or acc. to customers' request.
Delivery Time
15 days after receiving deposit
If you have any questions, please contact with us directly and welcome you can visit our Factory.
Plastic Coated Composite Pipe
Black Iron Pipe,Plastic Coated Composite Pipe,Plastic Coated Gas Pipe,Fbe Coated Pipe
HEBEI CHENGYUAN PIPE INDUSTRY GROUP CO.,LTD , https://www.hbcytube.com