Solid wood furniture market is a mixed consumer into a direct victim

Over the years, solid wood homes have been loved. In random interviews, about 70% of consumers prefer solid wood furniture when purchasing furniture. The reason is simple: environmentally friendly, practical, and durable. However, many consumers are not very clear about what exactly is solid wood furniture. In fact, the so-called "solid wood table" on the market, perhaps only the table legs are solid wood! The lady who is wary of fake solid wood furniture in Nanjing Drum Tower bought a set of furniture in a famous furniture chain store, with a total price of nearly 100,000 yuan. . On one occasion, she accidentally spilled the tea on the table. Because she was not negligently wiped in time, she did not expect that a piece of patent leather was lost in the water two days later. She took the pumping plate in the middle of the table to the Nanjing Product Quality Supervision and Inspection Institute for testing. The results showed that the plate she sent for inspection was not solid wood but wood chip.
Nowadays, there is no shortage of veneer veneer on the market. The so-called solid wood veneer is a layer of solid wood veneer on the surface of the furniture. It looks very similar to pure solid wood furniture from the surface, but its service life is shorter than that of solid wood furniture. This is one of the most common methods of forgery and is relatively easy to identify. Due to the veneer, the wood grain on the surface of the furniture is clear but irregular, and the texture of the front and back of the furniture cannot correspond. At the time of purchase, in fact, as long as you carefully observe it, you can easily distinguish it.
Not only the solid wood veneer, but also the “fake pure solid wood” which is more common in the market, and the “finger-joint plate” which is made up of deep-processed solid wood blocks as the base material of pure solid wood furniture, and then the outer solid wood veneer More deceptive. Some merchants sell the so-called pure solid wood furniture in the name of certain valuable wood furniture. In fact, the auxiliary materials use another relatively cheap wood, and the fish are mixed. Buyers who don't know the details often think that the whole furniture is made of such precious wood and it costs money. Therefore, remind consumers to carefully discern and purchase carefully when purchasing. Experts come to help you with the trick and as the name suggests, pure wood furniture, that is, furniture wood is all wood materials. Can be divided into pure solid wood, solid wood, solid wood veneer furniture. As early as May 1, 2009, the definition of solid wood furniture was indeed very vague, which led to the chaos of the furniture market, as long as there is a piece of solid wood can be sold according to solid wood furniture. Until the new edition of the "General Technical Conditions for Wood Furniture" national standard began to be officially implemented, for the first time, the definition of "all solid wood furniture", "solid wood furniture" and "solid wood veneer furniture" was strictly defined.
Among them, pure solid wood furniture refers to all the parts are made of solid wood furniture; solid wood furniture is also called board wood combined with furniture, that is, the table top, table (chair) legs and other frames use solid wood, and side panels, bottom, top, partition, etc. The parts are made of wood-based panels (density boards, particleboards, etc. are all made of wood-based panels); solid wood veneer furniture is made of wood-based panels, and the surface is decorated with solid wood veneers.

Metallographic Polish

(1) stainless steel polishing machine output good beam quality, including mode and mold stability; (2) stainless steel polishing machine output power is large enough (this is the key to speed and effectiveness), whether the energy is stable (usually requires stability of 2%, in some occasions is required 1%, so as to process the ideal effect); (3) stainless steel polishing machine should have high reliability, should be able to work continuously in harsh industrial processing environment; (4) stainless steel polishing machine itself should have good maintenance, fault diagnosis and chain function, downtime should be short; (5) the operation is simple and convenient, the control key function is clear, can refuse illegal operation, protect the stainless steel polishing machine from damage. Stainless steel polishing machine should follow the principle of purchase: stainless steel polishing machine technology has many valuable characteristics. However, specific to a product is suitable for the use of this technology, should follow the following principles :(1) with other existing methods can not be solved, only with polishing processing method to solve; (2) the existing other processing methods can be solved, but if the polishing processing method can greatly improve product quality, improve production efficiency and significantly increase economic and social benefits; (3) to fully consider the processing process with polishing processing related to those matching links; (4) to pay attention to the application of polishing processing and conventional processing composite processing technology, in order to make full use of their strengths

Metallographic Polish ,Struers Polishing Cloth Polishing,Struers Polishing Disc,Trojan Polishing Consumables

TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterial.com