With the development of new technologies and aluminum stencils, aluminum dies are increasingly used in blow molding, RIM, rubber, structural foam and RTM molds. Although it may not be suitable for all application areas, in fact, its use is becoming more and more common. The following is a brief analysis of the precautions for mold plating.
Everyone wants to extend the life of the mold, such as using traditional tool steel to make molds with hard chrome or nickel metal plating, or more specialized engineering coatings to prevent surface wear or Corrosion, which promotes better demolding. Since then, in order to find the same goal, we have started to use aluminum molds and found practical solutions.
In order to be able to injection molding to produce better decorative parts, in addition to extending the service life of the mold, the manufacturer also hopes that the surface of the aluminum mold can maintain a certain degree of gloss, so it is recommended to use an electroless nickel spray process because This method helps to extend the life of the mold surface finish, making it relatively easy to produce decorative parts.
Since the texture of the aluminum material is soft, if the surface coating is not used, it is easily worn by the plastic to accelerate the damage, thereby changing the gloss of the injection molded part. The non-electroplated nickel coating adds 50 RC to the mold surface to protect and extend the gloss and structure of the mold surface.
Non-electroplated nickel coatings can achieve better surface finish quality than aluminum itself, but it must be noted that some surface treatment is required before the mold can be plated.
In order to achieve the lens level quality level, it is recommended to first process the surface of the aluminum mold to the SPIA-3 level of finish, and then apply a high-phosphorus electroless nickel coating of 0.0003 to 0.0005 before further polishing. It achieves a diamond-quality finish level.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Mew Manual Winch Mast ,Telescoping Tv Antenna Pole,Telescoping Antenna Mast Lowes,Telescoping Antenna Tower
TIANHEMAST , https://www.robomasts.com