The hardware is divided into ordinary hardware and special hardware according to the function. Ordinary hardware is divided into hinge rails, decorative handles and decorative locks according to the setting method. Special hardware categories are divided into bathroom hardware and kitchen accessories according to the setting method.
Anmon Faucet
Hardware purchase Tips:
1. The hinges, slides and locks with good sealing performance should be selected. When opening and closing, pulling a few times feel its flexibility and convenience.
2. It is advisable to choose a lock with good performance. When the key is selected, the key can be inserted and pulled several times to see if it is smooth or not, and whether or not the switch is screwed up can be saved.
3. Choose a good type of decorative hardware with good appearance. When buying, it mainly depends on whether the appearance is flawed, how the plating gloss is, and whether the handle is smooth or not.
What are the requirements for aluminum alloy door and window accessories?
(1) Doors and windows and fittings: must meet the design requirements, specifications and models should comply with national standards.
(2) Floor Springs: The floor springs of the doors should be stainless steel or copper. Before they are put into use, they should be adjusted before and after the speed of opening and closing to facilitate their use. Hydraulic parts must not leak oil. Can also use the door.
(3) Door lock: It should be a double-sided safety lock.
(4) push hands: use stainless steel, aluminum alloy or copper.
(5) Pulleys and pulley frames: Hard nylon wheels, pulley frames, and galvanized steel products are optional.
(6) Sealing material: The sealing rubber strip should be used with a waterproof sealant.
How to choose a curtain track
No matter what style of curtain track, to ensure the use of safety, convenient opening and closing, the key is to see the thickness of the material.
How to choose home locks
The choice of locks should pay attention to the following three points:
(1) Comparing the weight of the lock with the handle, the heavier it shows that the material used for the lock cylinder is thicker and more wear-resistant. On the contrary, the materials are thin and easily damaged.
(2) Look at the surface finish of the lock, whether it is delicate and smooth, without spots.
(3) Open it repeatedly to see the sensitivity of the lock cylinder spring.
How to choose furniture handle
The handle of the furniture has a strong aesthetic effect on the appearance of the furniture. This is because the choice of furniture handle has an important relationship with the shape, color and location of the furniture. Therefore, choosing a furniture handle is very important. So how do you choose a furniture handle?
1. When you choose, you don't have to be very clever.
2. When choosing, pay attention to contrast and set off beauty.
3. When choosing, pay attention to unification.
Hardware Selection Hardware Furniture Brand Furniture Window Decoration Stainless Steel Aluminum Alloy
Prefabricated K house are structurally sound and will last a long time!
Prefabricated K house are a kind of Prefabricated House. It uses light steel as the skeleton and sandwich panels as wall panels. It only needs to determine the design and basic area requirements, so the rapid construction of such container houses is also the same. All guaranteed. Moreover, standard accessories are used for later assembly, which can make reasonable use of space, and each part is intended to be connected by bolts, which is also very good in terms of practicability. Moreover, its material quality is high, its long-term reliability is guaranteed, and its stability is also very good.
Material safety is guaranteed
The prefabricated K-shaped house is a new type of light steel composite board house. It uses color steel, light steel and other materials for construction, and it is also very convenient to install. Moreover, its steel plates have a certain thickness, even if it is an earthquake of magnitude 7 or above, it can also ensure stability, and there is no need to worry that it cannot be used in some harsh environments. Therefore, even in some earthquake disaster areas, etc., such houses can also be used, and the safety is still very guaranteed.
Overall construction cost is lower
Compared with ordinary houses, the construction cost of prefabricated K-type houses is still very favorable. Because sandwich panels are generally used, the materials can be recycled, and the repeated disassembly and installation of the house, and the second use are also guaranteed. This can effectively reduce construction waste, and achieve the effect of energy saving and environmental protection. Moreover, this type of house has a long service life and can be reused many times, so its cost performance is also good.
High construction efficiency
Prefabricated K house and Prefabricated T House only needs to have a good basic design, so the construction can be completed quickly. The construction team only needs to complete the construction according to the drawings, and the house construction can be carried out quickly. Moreover, the interior decoration is simple, and generally some light decoration materials can be selected, which can not only save the overall decoration and construction costs, but also ensure that the house can be put into use quickly, and the reliability of use is also guaranteed.
Prefabricated K House,Custom Duplex House,Prefabricated Mobile House,Dismantled Moveable Portable
Henan Jinming Metal Material Co., Ltd. , https://www.jinminghouse.com