The significance of the magnetic separation equipment bearing: The role of the magnetic separator bearing is explained in the wet magnetic separator operation guide article. The wet magnetic separator is loaded by the bearing, so good lubrication can greatly improve the bearing life. Directly affect the machine's operating rate and service life, and therefore need to inject qualified lubricants, the main oil filling place of the machine: roller bearings, rotating bearings, all gears, sliding planes, moving bearings. In general, after every 300 hours of operation of the magnetic separator, the bearings should be cleaned. If the bearing is lubricated with oil, it is advisable to fill the clearance of the bearing seat by 1/3 when adding the new oil. The maximum number is not to exceed 1/2. Only a few caps of the cover-type oil cup can be screwed tightly before operation. When the magnetic separator bearing is seriously worn or damaged, it should be replaced promptly, and pay attention to strengthen the lubrication; use tapered roller bearings, should pay attention to check the axial spacing of the bearing, to maintain it as 0.2-0.4 mm, if still not suitable, can be passed Increase or decrease the bearing pad at the paper pad to adjust.
Magnetic Bearing Equipment Bearing Lubrication Procedure: Filling Method: Remove the BOLT at the bearing lubrication point and use manual oil grab or pressure pump to directly inject the No. 2 lithium grease. Fill the plug immediately after filling to prevent debris from entering. It is recommended to add grease when the equipment is running, bearing lubrication is better and the oil injection period is 30 days.
Magnetic Bearing Equipment Bearing Lubrication Procedure: Filling Method: Remove the BOLT at the bearing lubrication point and use manual oil grab or pressure pump to directly inject the No. 2 lithium grease. Fill the plug immediately after filling to prevent debris from entering. It is recommended to add grease when the equipment is running, bearing lubrication is better and the oil injection period is 30 days.
Shaoxing Grace International Trade Co.,Ltd , https://www.shaoxinggrace.com