Cabinet decoration literacy installation acceptance

Cabinet acceptance meaning:

Cabinets usually come into our eyes with the overall image, but the overall appearance of a tall appearance can explain the quality of it? It must not be deceived by its beautiful appearance, and the inspection of detailed quality is still small. Because cabinets are subject to very frequent use tests, acceptance of cabinet installations is very important.

Cabinet installation acceptance process:

The parts that need to be checked and accepted in the cabinet installation are: 1. Check the quality, color number, and installation of the door. 2, check the handle installation firmness. 3, check the installation quality of the table, gaps, color and so on. 4, check whether the upper and lower water is smooth and tight. 5, check whether drawer drawer pull is smooth, no noise.

Cabinet installation acceptance notes:

1, see the edge of the plate

The cabinets of the high-quality cabinets are exquisitely sealed, smooth, and feel good. The sealing lines are straight and smooth, and the joints are fine. Some poor quality small factory cabinets have uneven edge sealing and tilting, which can cause formaldehyde and other toxic gases to evaporate into the air.

2, see the cabinet door

Whether the color number (color) of the door panel conforms to the model number on the consumer-ordered color card, the surface should be free of damage, and the overall color of the door panel is uniform and colorless. The door seam is uniform from top to bottom, width is uniform, width is between 1-2mm; the door panel is flat and there is no foaming phenomenon; there is an edged door panel, and the color of the edge seal meets the requirements when ordering.

3, see the assembly hole

The hole spacing on the board of professional manufacturers is evenly spaced and there is no misalignment. Small plant holes may have large gaps and affect the firmness of cabinet cabinets.

4, see the drawer slide

Pay attention to whether the drawers and pull-out baskets and racks are installed smoothly and smoothly, and whether the drawer gaps are even; if you open a door, a drawer or pull basket at random, you should be smooth, silent, lightweight, soft and resilient; no pulling is not smooth or right or left Loose conditions. The upturned door with pressure struts should be able to withstand the weight of the door falling.

5, look at the hardware hinge

The high quality hinge steel has good thickness, flexibility and corrosion resistance. The base is high, the arm is long, and there is no displacement at random. It can be opened and closed freely and no noise when used. Check whether the handle is horizontal, whether it is shaking, and the door panel should not be collided with each other when switching.

6, see the cabinet assembly effect

Assembled cabinets should be tightly combined with cabinets and countertops. The cabinets should be securely mounted and flat. The door panels should be horizontal and vertical, and the gap between the doors should be even and the opening and closing should be smooth. There are no cracks in the countertops, the sculpting is sleek, the size of the water basin and the stove top is reasonable, the faucet is firmly installed, and there is no water leakage in the water pipe.

The major attention of this industry is:

The owner must first carefully clean the kitchen floor and corners. After the cabinets are installed, many corners will never be cleaned again. Although the masters of the workers before the installation will be cleaned, they will not be as detailed as the owners themselves.