BCB cycloid internal gear pump Scope of application: Suitable for conveying non-solid particles and fibers, non-corrosive, the temperature is not higher than 150 ℃, viscosity of 5 ~ 1500cst of lubricating oil or Other similar liquid. BCB cycloid internal gear pump purposes: in the oil transmission system can be used as a transmission booster pump in the fuel system can be used for transmission, pressure, jet fuel pump in all industrial areas can be used as a lubrication pump BCB Cycloid internal gear pump structural features: This series of gear pumps are gear, shaft, pump, safety valve, shaft seal and other components, the gear heat treatment has a high hardness and strength of all pump operating components are Lubricate with the medium it delivers. The pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. The pump has a safety valve overload protection. However, the safety valve can not be used for long-term relief valve, if necessary, can be installed separately in the pipeline.
Hengqu Metal Products Co., Ltd. , http://www.gzwiremesh.com