The advantages of barrel pumps in our production are those of transportation of various acids, bases, solvents, petroleum Liquids such as buckets or containers. For businesses, to speed up the introduction of barrel pumps and selection of introduction, for the promotion of such products is a very effective way. Introduction and Selection of Barrel Pump Introduction of Barrel Pump: Barrel pump, commonly known as barrel inserting pump, is mainly used to transport all kinds of acid, alkali, solvent, additives, additives, oil products and other types of liquid media in barrels or containers. Drum pump should be based on process, water supply and drainage requirements, from the amount of liquid delivery, the device head, liquid properties, piping layout and operating conditions to be considered in five areas. Drum Pump Category: Hand drum pumps, electric drum pumps, pneumatic drum pumps. It has the advantages of convenient maintenance, reliable performance, long service life, concise appearance, advanced and reasonable structure, international standard, conveying without solid particle liquid, light weight, low viscosity, solvent, strong acid and strong corrosion, high viscosity and high lift. Barrel pump selection: According to the nature of the medium transported, the pump tube material can be selected 304 stainless steel, PP (polypropylene), Teflon (Teflon) and other materials pump tube, respectively, for different occasions, the selection principles are as follows: Pump parameters such as flow, lift, viscosity, temperature, specific gravity, length, diameter can be based on the specific production process to determine the pump; 2, flammable and explosive solvent medium must be used 304 stainless steel tubing, non-use of PP material Pump tube, easy to produce electrostatic detonating medium; medium acid corrosion medium can choose PP pump tube, the outer tube material must be (H + H alloy spindle), if the spindle is 304,316 stainless steel, titanium material or corrosion ; 3, strong acid and alkaline medium must use Teflon (Teflon) material pump tube, the outer tube must be Teflon + imported Hastelloy spindle, only the barrel pump has the technology, Teflon is the top corrosion-resistant Materials, has been widely used in strong acid and alkali enterprises; introduction and analysis of the introduction of the barrel pump and barrel pump, you can understand the barrel pump in dealing with various types of barrel and capacity Liquid media play a very important role, but for many users, the choice barrel pump is still relatively confused, businesses speed up the introduction of a barrel pump selection knowledge, to improve the user experience of the product has a very important role.
The formal freight elevators are those that can push cattle or even forklift. The speed is generally 0.5m/s, and the load is larger, including 2t, 3t, 4t and 5t. Due to the need to enter the forklift truck, the floor sill is of reinforced type. The rear wall of the car should preferably be equipped with a crash plate, and the car bottom should be steel plate. The load of the freight elevator is very large, and the height and width of the door opening are generally made to be consistent with the height and width of the car as much as possible. Then the call button panel in the car is on the side car wall.
Cargo Elevator,Cargo Lift Elevator,Cargo Elevator Lift,Small Cargo Elevator
Suzhou Stable Trade Co., Ltd , https://www.stable-elevator.com