What is Aluminum Honeycomb

[China Aluminum Network] aluminum honeycomb panel is mainly selected high-quality 3003H24 alloy aluminum or 5052AH14 high manganese alloy aluminum substrate, the panel thickness of 0.8 ~ 1.5mm fluorocarbon roller-coated or color light paint, color light paint in scratch resistance Traces, acid rain, corrosion and discoloration, self-cleaning are stronger than PVDF, floor thickness is 0.6~1.0mm, total thickness is 25mm.

The core material is hexagonal type 3003 aluminum honeycomb core, the thickness of the aluminum foil is 0.04~0.06mm, and the side length is 5~6mm. The roll forming skill is used to complete the forming of the front and back skins, the automatic machine equipment is folded and the front and back skins are in the device. Closely bite. All the processing processes are completed at the modern factory, and the hot-press molding technology is used. Due to the high heat conduction value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the aluminum skin are synchronous; the honeycomb aluminum skin has small holes so that the gas in the plate can be Free flow; sliding device buckle system does not cause structural deformation during thermal expansion and contraction, which can ensure a very high degree of flatness. Use adhesive adhesive: two-component polyurethane high-temperature curing adhesive, with automatic honeycomb composite production equipment passed Pressurized high temperature composite, overcoming the past honeycomb panel adhesive layer brittleness problem. The inner layer is a special hexagonal aluminum honeycomb made of an aluminum alloy whose hardness reaches H19. As the core plate adhered to the sandwich structure, it receives pressure in the tangential direction.

The

5 series aluminum alloy is a common aluminum alloy plate series,The main element is Mg, and the content of Mg is between 3-5%. It can also be called called Al-Mg Alloy,. The main characteristics are low density, high tensile strength and high elongation.

In the same area, the weight of Al-Mg alloy is lower than other series, so it is often used in aviation, such as aircraft fuel tank. It is also widely used in conventional industry.

The processing technology is continuous casting and rolling, belonging to the hot rolled aluminum plate series, so it can do the deep processing of oxidation. In our country, 5 series aluminum plate is one of the mature aluminum plate series.

Typical Application:  Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile Body Sheets, Automobile Inside Board, The Protective Cover On Engine

5 Series Alloy

Pattern Plate,Aluminium Tread Sheet,Shipping Plate,Five-Bar Aluminium Tread Plate

La Ya Aluminium products Co.,Ltd. , https://www.layametal.com