Paving wallpaper, lay people may think this is a very simple job, in fact, in order to paste the surface looks perfect, after construction, no fall off, bubbling and Other phenomena, but also a very particular thing.
First, remove the wall to remove the wall
The original paint, wallpaper and other objects. If there are cracks or potholes on the wall, use gypsum powder to replenish these areas and put a bandage on the surface; if there is a dusty wall or a partition wall, stick a glass cloth or a good cloth; some poor quality partitions Or the external wall to achieve the effect of insulation, full nail plasterboard.
Second, brush base oil
Alkyd varnish evenly brushed on the wall, moderate thickness.
Third, putty, polishing
Twice putty on the wall. After the putty is allowed to dry, sand the surface of the wall with sandpaper to remove uneven granules and make the wall smooth and flat.
Fourth, the cover oil
Once again, clean the walls evenly with clear oil, not too thick. This will prevent the walls from absorbing the wallpaper glue, sticking the wallpaper on the wall and making the walls even.
Five, cut wallpaper
Clipping wallpapers also have regularity, such as the problem of each wallpaper and the adjoining two wallpaper colors, pattern neatness, and the same size.
Six, paste wallpaper
After evenly applying the wallpaper glue to the wallpaper with a roller, it takes a while for the thicker wallpaper. When starting the wallpaper, for the seams, the two adjacent wallpapers are squeezed on both sides to make them fit. Then the scraper is used to press the seams and clean the extruded glue. After the wallpaper is pasted, use the scraper to paste the wallpaper from top to bottom.
Wall Construction Wallpaper Glass Coating Paint
Neway Rubber Products Co., Ltd. , http://www.lxrubbers.com