Slurry pump slag lifting pump accessories should pay attention to: 1. Lifting without a base or with a separate seat of the horizontal pump, lifting the center of gravity should be on the bracket side of the hole near the pump head, which should be Connect vertically with the lifting hook. In order to maintain the balance of the slurry pump, an auxiliary lifting wire rope should be provided between the eye bolt on the pump housing and the lifting hook. The screws on the bracket cover and the eyebolts on the front and rear pump shells are for disassembly and assembly of the bracket cover or the front and rear pump shells and shall not be used solely for the lifting of the whole pump to avoid accidents. 2. Lifting motor and the common base of the horizontal pump, lift the center of gravity in the square hole near the bracket at the coupling, the rope from the vertical through the lifting hook coupled, in order to maintain balance, but also in the pump A hoisting wire rope is provided between the eyebolts above the shell and the motor eyebolts and the lifting hooks. 3. Horizontal pump unit with coupling and other intermediate transmission should be split lifting. 4 wire rope contact with the pump body parts should be padded soft protection, so as not to damage the pump appearance or cause the wire rope cut off.
Emergency Battery Pack,Emergency Lighting Battery Pack,Emergency Battery Pack For Led Lights,Led Emergency Battery Pack
NINGBO WIKI IMPORT EXPORT CO., LTD. , https://www.emergencylightings.com