Polyester safety rope knowledge

Polyester safety rope

Product model number: EX018(5.02.018)

Brief description:

When workers work on beams, trees, and metal fences, personal protection devices must be equipped with operational positioning devices. Use when work requires stable operation positioning.

Instructions for use:

Attach the cord connecting hook to the left side retaining ring of the positioning belt and connect the tensioner to the other retaining ring (opposite to the left side). The rope is wound on the building body, and the tensioner is used to adjust the length and tension of the rope to ensure a stable position and limit the user's falling. Drop distance should not exceed 0.5 meters.

- Elongated rope: Left (right) hand holds the rope between the right (left) side tensioner and the building body, right (left) hand holds and pulls the tensioner's hand wheel, the user's body is tilted back Slowly loosen the rope and let go of the handwheel. The tightener still locks the rope.

- Shorten the rope: Pull the free end of the rope on the other side of the gripper with the right (left), and tilt the user body towards the building body, and at the same time tighten the rope towards the building body.

Suggested use:

The device should be used by people who have been trained in aerial work.

This device is a personal device and is for personal use only.

The device must not be exposed to oil, acids, solvents, open flames, high-temperature metals or sharp objects.

During use, the connector of the cord connector and the tensioner should be attached to the side band of the positioning band. The following conditions are strictly prohibited:

Attach all connectors to the same belt buckle; attach the tensioner or rope connector to a fixed point on the building; attach the tensioner connector to the belt buckle and connect the other connector to On the rope. Make sure the connector is closed during use.

test:

Thoroughly inspect ropes, tighteners and connectors after each use to see if there is mechanical wear, chemical attack or thermal deformation. The device is inspected by the person who will use the device. Do not use if there is any damage or doubt. The device is checked by qualified technicians every year. Check all parts for mechanical wear, chemical corrosion or thermal deformation.

easy to use:

The operation positioning device should be used together with the anti-dropping system. The fall prevention system itself meets some mandatory standards. (EN361-EN354-EN355-EN353-1/2-EN360-EN362.)

It is strictly prohibited to use this device in areas where explosion may occur.

It is forbidden to repair or modify this device by yourself.

Maintenance and storage:

Wash the device with warm water and household soap; do not use acids or solvents for cleaning.

Dry outdoors, away from open flames and all heat sources. The device should be put away. It should be put into the package during transport to prevent it from being exposed to moisture and mechanical and chemical damage.

This article is a reprint of online media. It only represents the author's point of view. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.

Washer

Flat Washer And Spring Washer,Washer Lock Spring,Brass Spring Washer,Coil Spring Washer

NINGBO YWC IMP. & EXP. CO.,LTD , https://www.nbywc-fastener.com