I don't understand anything. The decorator told me that after the painter arrived at my house, he had to do it in several steps. How to make a wall, how to brush the matte paint on the board? ? Generally do several times? ? Brush on the panel full Ya \ half Ya \ transparent half Ya \ That kind of good? ? Is the paint brand good? ?
First talk about the construction of wall paint.
As follows:
1. Putty putty, dry and then sandpaper, and level again. Repeat this until the wall is smooth and flat.
2, brush latex paint primer again, dry and then brush finish two times. That is, people often say "one end and two sides."
Then talk about wood paint construction operations:
1, the surface of the wood batch of putty ash, the best raw materials is very good, do not need to shave ash to cover uneven. After drying, sand with sand until smooth.
2, then brush the primer, then brush topcoat. Topcoats are usually brushed twice, but surfaces such as countertops are often three to four times.
In some parts of the interior of the decoration, the decorative wood part (referring to when it is painted with clear water) can be applied with a primer at the time of installation. This is because the interior decoration is in progress, and the wood part that is installed first is easily contaminated by cement, etc. After brushing the primer, you are not afraid of getting dirty.
3, if the wood lacquer is varnish, you can add color, so that more obvious wood grain, using water-based wood paint brushing. If it is mixed water paint, the color is determined by the color of the paint.
About the choice of matt, half matt, etc.:
This aspect is personal preference, on the other hand is popular. At present, the selection of semi-matt paint is the most.
Many paint brands, it is recommended that you buy a common brand name. Such as China Resources, Dulux and so on. The quality of these brands is guaranteed, environmental protection is safe and reliable, and if it is a specialty store, people who do not understand the market will not be slaughtered.
There are roughly three steps: substrate treatment, primer, and topcoat. Of course this is a simple statement.
The paint is generally more complicated. The panel must be “back-covered†in time after entering the market (buying materials to go home). When it is used, it is necessary to block the eyes and putty. According to different processes, there are generally two approaches: full and semi-closed.
The most common practice is to use two sides and two sides, two coats of primer (this is the practice of polyester paints, and other properties paints have another method).
The paint is generally divided into matt, semi-gloss, and high light, and the degree of reflection increases in turn. There is no good or bad. It depends on personal preferences.
Latex paint is relatively simple, requires putty polished smooth, clean and dry, PH value is lower than 10 (must be!), generally one end and two sides, that is, primer paint again twice. If the price of latex paint is low, only two coats of paint can be applied.
As for the brand, it is better to choose a big brand of a large company. The quality is stable and the price is high but it is worth the money.
Paint latex paint Interior decoration Cement decoration
PCR Plates, 96 Well PCR Plates, and 348 well plates are disposable consumables in the laboratory. They are widely used in genetics, biochemistry, immunology, medicine and other fields. They are not only used in basic research such as gene isolation, cloning and nucleic acid sequence analysis, but also Diagnosis of disease or any place where there is DNA or RNA.
The new line of white PCR products is designed specifically to optimize results when performing quantitative Real Time PCR (qPCR). The new 96 Well PCR plates are free of DNA, DNase, RNase, and other PCR inhibitors. 96 Well PCR plates have thin, uniform walls to ensure consistent, precise thermal transfer and excellent results.
96-Well PCR Plate,96 Well PCR Plate,96 Well PCR Plate Volume,96 Well Skirted PCR Plates,96 Well Plate Sealing Film
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedicalcare.com