|
|
|
1. Kailun this alarm lock uses two gears. The first gear can only lock the car, but it does not alarm. The second gear can lock the car and has the alarm function.
2. Use the key to twist the lock cylinder and insert the second gear of the lock. When you hear a “beepâ€, the lock enters the alarm state. After 15 seconds, when the lock or the car is shaken, an alarm sounds. Continuous vibration continuous alarm, each alarm sound for 10 seconds.
3. When you hear a “squeaky, slightly, slightly,,,,,,†continuous sound or an alarm sound suddenly stops for less than 10 seconds, reminding the battery that it is exhausted, you need to replace the battery.
4. When replacing the battery, open the lock, unscrew the two screws next to the lock hole, and remove the rubber washer to replace the battery. Please pay attention to the positive and negative poles.
5. Important reminder: Please keep this manual for future battery replacement.
Diamond Lapidary Grinder and Saw
A lapidary machine adapted to produce cabochon shaped gem stones or the like; the machine having a powered rotary grinding wheel provided with a contoured in cross section annular grinding surface adapted to grind peripheries of cabochon shaped gem stones; a powered rotary dop holding shaft structure adapted rotatably to carry a dop supported gem stone in contact with said annular grinding surface; said shaft structure axially parallel to and laterally movable relative to the rotary axis of said grinding wheel, said shaft structure having a generally oval shaped cam thereon; a normally stationary idler roller having a periphery engagable by said cam and means for adjusting the position of the periphery of said idler roller in directions laterally relative to the rotary axis of said shaft structure in order to progressively cut peripheries of stones down and to produce cabochon shaped stones of various overall sizes.
Our 6inch 8inch Lapidary Combination Unit Cabbing Grinder Polisher Machine with 1"stainless steel shafts and ball earings,7pcs Aluminums Spacers and Flanges and locknut It also has a 3/4HP Thermal protected ball bearing motor, the Hood process by 304 stainless steel.The Cover has two U-Slot for easy remove. We also can supply a adjustable drip water system with 8 shut off valves for each wheel. The shaft is tapped for a ¼-20 spin-on polish head at right ends and tapped for a 1/2" Aluminum lap or Diamond Facet Laps at left ends. Accepts silicon carbide or diamond wheels or rubber expandable drums.
rock saws and polishers,rock cutting saw,lapidary trim saw,Lapidary Grinder Polisher, Lapidary Cab King Grinder, Lapidary Cabbing Grinder, Diamond Lapidary Arbor, Diamond Trim Saw, Diamond Slab Saw, Diamond Cutting Saw
Hans Superabrasive Material Co., Ltd. , https://www.hansuperabrasive.com