It is not only the six key to eco-friendly environmental cabinet design

There are E0, E1 grade cabinet plates on the market, and even super E0 plates, which are called environmental cabinets. The average consumer's understanding of environmental cabinets is one-sided, not just using the so-called eco-friendly sheet, and formaldehyde is not exceeded as the environmental cabinet. What is the real environmental cabinet?


San Giro Cabinets

Harmful substances do not exceed the standard. In addition to the pollution of formaldehyde in cabinets, there are other chemical pollutions. There may be harmful substances such as benzene and hydrazine in the cabinet. In addition to the panel, there are cabinet panels and viscose that need to be processed in order to ensure that the content of harmful substances does not exceed the standard.

Be careful of rough work and cause harm to the human body. Materials, poorly-operated cabinets may have burrs, sharp corners, fast mouths, etc. in the details. These unreasonable parts can easily cause bodily harm. Handling food directly on the cupboard may be due to the quality of the countertops, resulting in accidental eating of impurities, debris, etc., as well as harm to health.

Cabinets also have noise and light pollution. To avoid these problems, environmentally-friendly cabinets must use high-quality hardware and reasonably select panels and countertops.

The true environmental protection is the recyclability of materials. In terms of the environmental protection of materials, aluminum is better than stainless steel, because the boiling point of aluminum is relatively low, only 200 degrees, while stainless steel is up to 2,000 degrees, which is not conducive to the recycling of materials. Some inconspicuous parts, such as the adjustment feet of the cabinet, can be completely used plastic back materials, as long as its strength is qualified, there is no need to use the so-called ABS plastic.

Environmental cabinets should use energy-efficient designs. The selection of the sink directly affects the use of tap water. Compared with the currently popular double-tank water tank, the single large water tank saves water more; because large water tanks need to store more water, and the double water tanks can be immersed and washed separately, and the water can be used more rationally.

The gas stove should be set to avoid the air outlet as much as possible. If it is installed near the door, the gas will be affected by the flowing air when it is used. Not only the use of gas will increase, but the smoke will be dispersed by the wind and cannot be absorbed in a centralized manner. This will affect the range hood. Machine work.

Reasonable garbage disposal equipment. The kitchen has always been considered as a "manufacturing shop" for rubbish. It has become commonplace to soil floors and clog sinks. If the residual rubbish is improperly cleaned, it will breed bacteria and attract four evils.

Cabinet design should highlight safety. Cabinets are places where water, electricity and coal are gathered together. If these three things are used improperly, they will cause harm to the environment and even affect personal safety. The overflow outlet in the sink should be set reasonably; electrical appliances, wires, and plugs should be protected against leakage; and gas valves, flameout protection, and so on.

Links: home decoration in addition to formaldehyde three misunderstandings and induced malformations

Matters needing attention sink plate formaldehyde stainless steel home improvement range hood electrical appliance stainless steel cupboard cabinet door kitchen cabinet door

Surface Conditioning Product

Surface Conditioning Product will include Drill Buffing Head , Nylon Flap Wheels , Hand Pads And Roll , and Surface Conditioning Discs etc.


This drill buffing head is made of 100% high quality pure soft cotton cloth, these buffing wheels are perfect for fine polishing of various jewelries made of brass, silver, gold or plastic, especially for high luster mirror buffing.


The nylon abrasive polishing wheel is composed of fiber, bonding and abrasives. Nylon abrasive polishing wheel is widely used in the treatment of decorative patterns on the surface of metal, wood and plastic materials, especially suitable for the processing of stainless steel.

Scouring Pad are made of a non-woven nylon web impregnated with abrasive grain and resin bond, designed for hand applications such as deburring, polishing, cleaning, finishing, and surface preparation on metal composite or plastic surfaces.


surface conditioning disc made of aluminum oxide, are superior in performance, anti-blocking, high abrasion resistant, waterproof, oil-proof and safe.Our Surface Conditioning Discs are torque spiral design with strong flexibility and long service life.


We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.

Non Woven Nylon Flap Disc 82 Jpg

Non Woven Abrasive Sourcing Pad Roll 2

Roll On Sanding Disc Jpg

Drill Buffing Head 5

Surface Conditioning Product,Drill Sanding,Polishing Buff Wheel,Cotton Buffing Wheels With Shaft,nylon buffing wheels,wool flap disc

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com