Is it suitable for renovation in winter? What are the things to be aware of when decorating?

Near the end of the year, the weather gradually turned cold. Many owners who just delivered the house thought that the winter temperature was low and the temperature difference between day and night was large. At this time, the decoration could not guarantee the quality of the home improvement project. In fact, experienced home improvement owners will find that they want to install a good quality house and want to save more costs. Signing a cross-year decoration should be a rare choice, but the winter decoration needs attention. What are you? The following decoration home network Xiaobian will come to introduce you.


装修需要注意的事项


Things to pay attention to in winter decoration:


First, the winter decoration should be properly reserved

When the winter is being renovated, the seams of the doors and windows should not be too small, so as to prevent the summer from tightening after the thermal expansion, and the closure is not strict. When laying solid wood flooring, it is necessary to leave a 2 mm expansion joint around the door. When making furniture, it is necessary to leave a joint seam of about 0.1 mm. The seam between the floor and the wall is formed by the floor beading, which can be well handled. The problem of excessive gap between the wall and the floor.


Second, the tiles should be soaked before the paving

In the winter decoration, the floor tiles and tiles should be treated with water before the paving, so the water must be saturated. Only in this way, when bonding, the cement does not adhere to the cement due to the suction water, and the phenomenon of emptying and falling off occurs.


In addition, whether it is a wall tile or a floor tile, it needs to be moved from the outdoor to the interior for 24 hours, and then it can be laid when it is adapted to the indoor temperature, so as to avoid the phenomenon of emptying and falling off after construction.


Third, the wood should be placed indoors for 3-5 days.

The main materials used in the decoration, especially the wood, should be placed in a room with heating equipment for 3-5 days to volatilize the moisture generated by the temperature change. This is done so that the moisture content of the wood is close to the level inside the house, which avoids wood deformation after the decoration.


装修需要注意的事项


Fourth, the wooden keel moisture content should be below 12%

When the gypsum board ceiling operation is carried out in winter, the moisture content of the wooden keel must be controlled below 12%, and the keel must be firm and not loose, so that the crack of the gypsum board ceiling can be prevented. A gap of about 0.5 cm is left between the gypsum board and the joint between the gypsum board and the wall surface. The gypsum powder is added with latex to adjust the caulking, and then the double-paste kraft paper is used to scrape the putty to prevent the gypsum line from cracking.


Fifth, the indoor temperature of the brush coating is not lower than 5 ° C

In the winter decoration, if there is a strong wind and cool weather, it is not suitable for the oil work industry. Because the winter sand is large, the dust is easy to adhere when the paint and paint are not dry. Pay attention to the windless weather to ensure the paint application environment. The temperature is not lower than 5 degrees Celsius, the ambient temperature of the varnish application is not less than 8 degrees Celsius, and the application temperature should be strictly in accordance with the temperature in the product description. To prevent sand from falling on the surface of the paint, close the doors and windows.


Sixth, the batch of putty is best from 10:00 to 16:00

In the winter decoration, the putty is not dry to paint, the wall is prone to cracking, and the batch of putty is best chosen between 10:00 and 16:00. This period of time is relatively high, which can prevent the new batch of putty from freezing. After the first time the putty is completely dried, the second time the putty is approved. After the second time, the putty is completely dried, and then carefully sanded with sandpaper.


The above is the introduction to the winter decoration of the home of the decoration home. If you need to know more information, please continue to pay attention to our home encyclopedia!



More related wonderful reading:

How should shops design six major retail decoration considerations?

What are the precautions for the new Chinese style living room decoration?

Restaurant decoration design elements restaurant decoration precautions

How to decorate the living room? Living room decoration precautions

What are the garden decoration styles? Garden decoration precautions

All In One Solar Street Light

All in one solar street light,solar all in one street light,all in one solar street light 200w,solar street light all in one

ZHONGSHAN G-LIGHTS LIGHTING CO., LTD. , https://www.glightsled.com