How to correctly operate the standard light source color light box? It is unclear that the requirements for industrial production of color are getting higher and higher. The use of standard light source box bar coater to detect color is a commonly used method in the industry, simple, convenient and reliable. Of course, the tool inspection product is the most important thing for the color wheel to operate correctly. The correct operation can not only improve the accuracy of the inspection product but also improve the service life of the standard light source box.
Correct detection step:
1) Color detection is the first to prepare a colorimetric sample;
2) After the color sample is ready, the light source is selected. According to the color requirements and use environment of the product and the customer's requirements for the light source of the product, the choice of the light source is decided. Briefly introduce the light source in the standard light source box:
a) D65 lamp: the necessary light source for the standard light source box, belonging to the simulated artificial fluorescent lamp, color temperature 6500K, referred to as D65 fluorescent lamp.
b) F/A lamp: This kind of light source belongs to the household and hotel indoor light source, and the color high and low temperature test chamber temperature is 2700.
c) CWF lamp: It is a commonly known department store lamp or "cold white lamp", which is configured as a CWF light source lamp used by general department stores in the United States.
d) TL84 lamp: This is a commonly used power-saving lamp in Europe.
e) UV lamp: It is ultraviolet light, etc. This kind of light source is suitable for detecting textiles, papers, etc. containing brighteners, and can also help identify paints containing metal powder.
3) Angle view of product observation
4) Pay attention to the use and maintenance of standard light source box
a) Determine the stable 220V±20V power supply of the standard light source box and supply the power well to prevent the voltage from being unstable and damage the electronic equipment inside the light box, affecting the luminosity and colorimetric work.
b) The standard has a damaged current. When using it, be careful not to exceed this rated current to avoid accidents.
c) Where the standard light source box is protected from the place where it is not subject to external strong light, if the conditional company is doing it is to design the darkroom, and do not place any debris inside the light box.
d) The standard light source box should not be placed more than 1 meter in height, which is convenient for observation and suitable for finding good observation angles.
e) In the color sample test, the color sample should be placed in the center of the light box. If there are multiple samples to compare, it should be placed side by side in the light box, so be careful not to overlap.
f) Prevent the paint on the inner wall of the light box from being contaminated and peeled off to avoid affecting the observation environment. DIN cup BR>g) Do not touch the bulb by hand. One of these bulbs is extremely hot and can be burnt. Then it stains the bulb with oil and other stains, causing local heat dissipation and burning.
h) Do not change the arrangement of the lamps to avoid affecting the uniformity of the light source distribution.
i) If the power line has an odor or the lamp source is faulty, the electrician should be notified in time for repair.
j) Make a light box cleaning work.
For information on the standard light source color light box, please refer to it: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Carbon Electrode Paste is produced by putting petroleum coke and asphalt into melting tank to dehydration, melt, then adding them into kneading pot to kneading, molding and sintering.
Fully automated batching, crushing, mixing, kneading, molding, quality assurance, strict control of ash content, volatile, ensure low resistance and high strength.
Materials:Calcined Anthracite Coal,CPC,Anode Scrap,Coal pitch,Coal Tar,Graphite Powder.
Shape:Cylinder,Egg,Trapezoid.
Application:Used in soderburg furnace to make Various alloy, such as Ferro silicon, ferro manginess, ferro silicon manganese,nickel alloy, Chromium alloy.
Electrode Paste,Electrode Paste Standard,Airtight Electrode Paste,Special Carbon Electrode Paste
Carbographite Industrial PTE.LTD , https://www.carbographite.com