Acceptance In addition to identifying the overall effect of decoration, the main thing is to see if the quality of the hand is satisfactory. Acceptance can be identified from the following aspects:
· It is the new masonry wall to be vertical, the same level of the brick body, the joints are even and tidy, the brick seam does not exceed 1mm, the overall tile error is not more than 0.8cm.
· The drainage should be smooth, no leakage, backflow and water phenomenon, high-grade water parts without clamp marks and rubbing phenomenon.
· It is the wooden seal line, the corner line, the waistline veneer touches the mouth not to exceed 0.2mm, the line and the line mouth slot joint does not exceed 0.3mm, the veneer and the plate meets does not exceed 0.2mm, the sliding door entire surface error does not exceed 0.3mm.
· It is the overall production error of the plane ceiling that does not exceed 0.5, the crack between the board and the board does not exceed 0.3mm, and the error of the plastic ceiling does not exceed 0.5mm.
· It is the lighting circuit laying that should accord with the regulation, the socket, lamp switch, total gate, electric leakage switch,etc. should have certain height, kitchen, air conditioning must lay the special line, TV aerial and telephone special line should be installed in the convenient maintenance position.
· The paint should be smooth, feel good, no traces of scratches, no color difference and nailing within one meter.
· It is straight line on the wall of the wall and there is no obvious convexity and color difference within one meter. It is used to wipe off the dust. The construction quality is related to the quality of the construction team; it is also related to the unit price of the construction project. The best way is to sign a contract between the two parties before the start of construction to clarify the decoration requirements and acceptance criteria.
Entrance decoration restaurant decoration switch TV decoration socket lighting paint kitchen sliding door
SF-202A PRICE SACLE ADVANTAGE:
2.Automatic zero adjustment,automatic shutdown in 180 seconds,power saving function.
3.With counting function.
4.With overload, low voltage battery prompt function.
5.Unique front design, more convenient reading.
Jiangyin Suofei Electronic Technology Co.,Ltd. , https://www.suofeiscales.com