Home Improvement General Paint Process

Home Improvement General Paint Process

The paint project is the final procedure of this project. There are many ways to make up for it with paint, especially the color and the rough place.

First, the first thing to do is to do a good job of on-site hygiene, check whether there are missing accessories and wood products in wood products have not reached the standard.

2. Before all the paint on the wood is done, the color will be corrected in the place where there is a color difference.

Third, the wood paint is normally two primers, three coats of paint, and each program must maintain enough drying time. The project manager must supervise, carefully sandpaper, dust the next paint, especially the line surface, and finally paint the film full and uniform, no particles, no sagging, feel good, but there is a paint to the wall latex After the paint is finished, he will squat. Water-based paint putty should always use oily putty.

Fourth, the latex paint first put the water, electricity, slot position and bricklayer painting position make up a putty, easy to dry early.

Fifth, the right screw on the plaster point anti-rust paint, to be careful not to leak, there are screws beyond the plaster surface to re-level.

Sixth, latex paint is normal after the tie putty, the three bottom and three sides of the paint, putty until the wall surface putty dry, light polished, until the formation of the light to notify the acceptance of the owner, and then paint (necessary lighting inspection at night). When paint is applied, it should be uniform, use a row of pears, clear pears, and each paint should be dried before painting.

7, all the styling surface of the latex paint edges and edges should be flat, to straight, grudge with a ruler detection, including grinding, the shape of the finished product is to the side, the corner is the angle. In the case of latex paints for wood products, wood products must be oiled.

8. Before the latex paint is finished, coordinate the installation of water and electricity and the floor time. Prior to laying the floor, the owner was informed to carry out a preliminary inspection of the paint. After all the installations are completed, the painter finishes the paint on the baseboard and the last time on the wooden surface and repairs the latex paint.

9. Upon completion of all inspections of the various types of work after the completion of the project, the owner shall be informed of the acceptance of the paint and the whole, and please sign after passing the inspection.
Related Links


â–º Simple and practical paint coating construction Raiders â–º Home decoration paint construction process and process
â–º Indoor paint construction process and points â–º What are the key to indoor paint construction?
â–º Wall top painted with wall paint construction process â–º Paint Precautions in Construction
â–º Analyze eight common problems in paint decoration â–º 10 kinds of paint conditions for the right medicine
â–º Renovation paints 17 points for safety and quality â–º Methods and methods for construction and acceptance of paintwork
â–º How to remove the taste of paint after home renovation â–º

Decoration Construction Knowledge Paint Latex Paint Home Improvement Interior Decor

2021 Quantum Grow Light

Grow Light panel with scientific spectrum, include red, warm white, 6000k, UV IR led, the best grow light for indoor plant growth. also customized ratio by your requirement.

Quantum Board Grow Light is a great ideal for all kinds of indoor garden plants: lettuce, orchid, organic herbs, pepper, strawberries, succulent, hydroponic, medical plants.
Whether it's hydroponics, plants in soil, you can add a touch of magic to every veg and flower with Xeccon grow lights.

1



2

grow light strip, grow strip, led strip grow plants, led grow light strip review,led grow light strip kit

Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwygrow.com