Many families now use wood materials such as blockboards, fingerboards, and melamine boards. But what is the fingerboard? It must be understood that some people do not understand it, and some friends may be the first time they have heard of the fingerboard. Therefore, the following Xiaobian will introduce to you what the finger board is and what are the advantages and disadvantages of the finger board.
What is a fingerboard?
The finger joint board is a solid wood board that is made by splicing a plurality of wood boards, and its top and bottom are not sticky and pressure plywood. Therefore, the amount of glue used in the production is extremely small and the material is more environmentally friendly, so more and more people are favored. Because its vertical board between the use of sawtooth-like interface, similar to the shape of the two fingers cross docking, so named fingerboard. The fingerboard is an eco-friendly sheet, and its texture looks very natural, giving a sense of return to nature.
Fingerboard Advantages
1. The surface of the fingerboard is generally painted with clear water. The environmental protection effect of the paint seal is relatively good. Basically, it can reach the E0 level. Therefore, the furniture made by the fingerboard is more environmentally friendly and healthy.
2. Fingerboards are currently cheaper on the market, generally at a price of 110-180 yuan. Compared with some good woodworking boards, fingerboards are not much more expensive.
Third, finger board disadvantage
1. Fingerboard furniture is not real solid wood furniture in the traditional sense, flat wood furniture is, so the fingerboard does not have the durability of traditional solid wood furniture. In addition, the finger-joint plate is generally made of pine, cypress and other wood material, the material is not good, and its air-drying time is generally shorter, the water content is also larger, it is easy to cause deformation cracking.
2. Fingerboards commonly used in modern life are divided into single-finger fingerboards and three-finger fingerboards. The three-tier fingerboards are naturally much more resistant to deformation than single fingerboards. Therefore, when choosing the fingerboard, everyone remembers to select the three-finger fingerboard, which is more durable.
Editor's summary: What is the finger board and what are the advantages and disadvantages of the finger board? For more information, you can follow this site information.
Comparison of advantages and disadvantages
Manufactured from themoplastic EPDM and Brass, these clever toggle fasteners have numerous applications. Most often used to secure hardware and other objects to thin steel, aluminium, plywood or fibreglass surfaces where there is no access to the cavity.
With a captive Brass Nut, the toggle expands within the cavity as it is tightened. The rubber-like compound provides a seal against water and salt penetration while insulating against vibration.
Available in a range of sizes to suit many applications onboard your vessel.
Sold individually, with automatic discounts for purchases over 1000 units.
Note that the nuts have metric threads and the bolt is not supplied.
M3,M4,M5,M6,M8,M10 & M12 also available
Rubber Nut,Rubber Nutsert,Expanding Rubber Nut,Rubber Anchor Nut
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com