Causes of Different Colors Occurring After Anodic Oxide Films of the Same Type of Aluminium Part

If there is such an anodization in the same tank and dyeing at the same time, there may be a problem with the clamping.

(1) One of the clamps is loose, causing poor contact and thin film.

(2) The cross-section of one of the fixtures is too small to accommodate the normal passage of current, resulting in heating of the fixture, excessive power consumption, and low current density through the workpiece.

Variable Peristaltic Pump

Variable Peristaltic Pumpis a peristaltic dosing pump that can distribute many types of liquids, such as water-based liquid/shampoo/sauce/chemical-based liquid, etc.

The flow rate of the industrial variable speed Peristaltic Pump can be adjusted by the digital knob to adjust the motor speed to achieve the effect of adjusting the flow rate

The liquid only gets in touch with the Peristaltic Pump Tubing, will not cause cross-contamination. it's suitable for Liquid transfer occasions with high cleanliness requirements, Eg. : food/beverage/cosmetic/medical/biopharmaceutical...

For the Peristaltic Pump Tubing, We have different material choices for your various liquids. The standard tube is silicon tubing which conforms to the FDA certificate. Except that we also offer the Saint-Gobain imported tubing, Eg.: Norprene®A-60-F/Norprene®chemical /Pharmed® BPT... Which suitable for various chemical-based liquid.

Suitable for various industrial applications.

Variable Peristaltic Pump,Intelligent Programmable Pump,Dosing Peristaltic Pump,Timed Quantitative Pumps

Baoding Chuangrui Precision Pump Co., Ltd. , https://www.chuangruipump.com