In the current manufacturing process of wooden doors on the market, in order to make the lock more firm after installation, the strength of the hole-holding area of ​​the door lock will be strengthened, and the lining of the lining material is mostly used. Therefore, the wooden door core material is inspected through the hole-retaining portion of the door lock. Not very realistic.
1. Comparing the three companies , the cheap wooden doors are not the same as other products. Consumers can only see the surface of the door, and their internal quality cannot be judged. Even if it is an expert, it is sometimes difficult to judge the interior of the wooden door simply by observing the appearance. It is recommended that consumers not only consider the price as cheap but ignore the inherent quality of the product. Wu Chenxi pointed out that the environmental performance of the door is extremely critical. Consumers do not have to choose expensive paint-free doors instead of buying solid wood composite doors. This way, environmental performance is more secure.
2, buy a door to buy solid wood doors Chinese people often love wood products for ten minutes , but they ignore the natural properties of wood. The stability of solid wood doors is not strong, and door body deformation, fissures at joints, and surface cracking are more likely to occur than other types of doors. In fact, the performance of solid wood composite doors with good environmental performance is not worse than that of solid wood doors, and even stability is better than solid wood doors.
3, the heavier the door is, the more the weight of the solid wood door cannot be judged by the product's internal quality. The particle board sometimes weighs more than solid wood panels. Although the raw material used to manufacture the particle board is broken wood chips, a lot of adhesives are applied during the production process. After curing, the glue accounts for a considerable part of the board, resulting in Its weight is not light. In addition, due to the different size and thickness of the door leaf and the filling of the door core, the weight of the wooden door is also different. Therefore, the specific weight is not the most reasonable basis for judgment.
4, only concerned about the door, do not care about the door when consumers choose the wooden door, often only pay attention to the quality of the door, however, there are many post-sales problems behind the wooden door is from the door. There are three kinds of solid wood multi-layer door covers, density door covers and solid wood door covers on the market. MDF door cover waterproof moisture performance and nail holding power are relatively poor, easy to cause the phenomenon of sinking and scratching the wood door; etc.; solid wood door cover is generally more teeth wood, screw screw is easy to form a phenomenon. She pointed out that the best choice for solid wood composite doors is the standard solid wood multi-layer door covers, which can guarantee the service life of wooden doors.
5, through the door lock hole to determine the door core material part of the "smart" consumers observed that the wooden door lock is installed on the scene, "Why not to stay through the door hole to observe the core of the door to buy it?". However, in the current manufacturing process of wooden doors in the market, in order to make the lock more firm after installation, the strength of the door lock hole retention area will be strengthened, and the practice of lining the lining material is mostly adopted. Therefore, the door is inspected through the door lock hole. Core material is not very realistic. From the perspective of protecting the environment and conserving resources, it is suggested that the problems of wooden door products be maintenance-oriented. Slight cracks in the paint door are normal. Wood has the properties of shrinking and swelling, which is a natural defect of wood. This problem has been difficult to overcome in the past. The current technical means can only minimize the occurrence of cracks, but it cannot be completely eradicated. Subtle cracks in the paint door can be completely resolved through repair. Returning to the factory is not the only way to repair. Some minor problems can be repaired at the customer's home. At the same time, the "Wooden Door Repair, Replacement, and Return Specifications" will be introduced next year, and the specifications will require the doors in more detail to be repaired, replaced or returned.
6. The consumer complaints currently received by the color difference are not allowed to be partially focused on the color difference. The problem of color aberration cannot be completely avoided. For example, the unpainted door of the same suit may have different colors due to the different batches of the cover material, and the colors that consumers see in the store may be slightly different from those in the home. This is especially true for solid wood veneer-covered paint doors. The wood veneer is obtained from different parts of the wood and the age of the wood is different. The color of the cut out pattern is also not quite the same. The same is the black walnut, and some may be dark in color, and may even be shallow. This is due to the natural properties of the wood; the difference in the number of paint channels and the difference in the color mix of each paint can cause slight color deviations, so consumers should not be over-satisfied with the wooden door without chromatic aberration. Â
1. Comparing the three companies , the cheap wooden doors are not the same as other products. Consumers can only see the surface of the door, and their internal quality cannot be judged. Even if it is an expert, it is sometimes difficult to judge the interior of the wooden door simply by observing the appearance. It is recommended that consumers not only consider the price as cheap but ignore the inherent quality of the product. Wu Chenxi pointed out that the environmental performance of the door is extremely critical. Consumers do not have to choose expensive paint-free doors instead of buying solid wood composite doors. This way, environmental performance is more secure.
2, buy a door to buy solid wood doors Chinese people often love wood products for ten minutes , but they ignore the natural properties of wood. The stability of solid wood doors is not strong, and door body deformation, fissures at joints, and surface cracking are more likely to occur than other types of doors. In fact, the performance of solid wood composite doors with good environmental performance is not worse than that of solid wood doors, and even stability is better than solid wood doors.
3, the heavier the door is, the more the weight of the solid wood door cannot be judged by the product's internal quality. The particle board sometimes weighs more than solid wood panels. Although the raw material used to manufacture the particle board is broken wood chips, a lot of adhesives are applied during the production process. After curing, the glue accounts for a considerable part of the board, resulting in Its weight is not light. In addition, due to the different size and thickness of the door leaf and the filling of the door core, the weight of the wooden door is also different. Therefore, the specific weight is not the most reasonable basis for judgment.
4, only concerned about the door, do not care about the door when consumers choose the wooden door, often only pay attention to the quality of the door, however, there are many post-sales problems behind the wooden door is from the door. There are three kinds of solid wood multi-layer door covers, density door covers and solid wood door covers on the market. MDF door cover waterproof moisture performance and nail holding power are relatively poor, easy to cause the phenomenon of sinking and scratching the wood door; etc.; solid wood door cover is generally more teeth wood, screw screw is easy to form a phenomenon. She pointed out that the best choice for solid wood composite doors is the standard solid wood multi-layer door covers, which can guarantee the service life of wooden doors.
5, through the door lock hole to determine the door core material part of the "smart" consumers observed that the wooden door lock is installed on the scene, "Why not to stay through the door hole to observe the core of the door to buy it?". However, in the current manufacturing process of wooden doors in the market, in order to make the lock more firm after installation, the strength of the door lock hole retention area will be strengthened, and the practice of lining the lining material is mostly adopted. Therefore, the door is inspected through the door lock hole. Core material is not very realistic. From the perspective of protecting the environment and conserving resources, it is suggested that the problems of wooden door products be maintenance-oriented. Slight cracks in the paint door are normal. Wood has the properties of shrinking and swelling, which is a natural defect of wood. This problem has been difficult to overcome in the past. The current technical means can only minimize the occurrence of cracks, but it cannot be completely eradicated. Subtle cracks in the paint door can be completely resolved through repair. Returning to the factory is not the only way to repair. Some minor problems can be repaired at the customer's home. At the same time, the "Wooden Door Repair, Replacement, and Return Specifications" will be introduced next year, and the specifications will require the doors in more detail to be repaired, replaced or returned.
6. The consumer complaints currently received by the color difference are not allowed to be partially focused on the color difference. The problem of color aberration cannot be completely avoided. For example, the unpainted door of the same suit may have different colors due to the different batches of the cover material, and the colors that consumers see in the store may be slightly different from those in the home. This is especially true for solid wood veneer-covered paint doors. The wood veneer is obtained from different parts of the wood and the age of the wood is different. The color of the cut out pattern is also not quite the same. The same is the black walnut, and some may be dark in color, and may even be shallow. This is due to the natural properties of the wood; the difference in the number of paint channels and the difference in the color mix of each paint can cause slight color deviations, so consumers should not be over-satisfied with the wooden door without chromatic aberration. Â
Home look at building materials market price brand wooden door paint door price
Spring Tension Set,Circular Knitting Machine Spring,Yarn Spring Tension Set,Spring Textile Tension Set
Changzhou Longfu Knitting Co., Ltd. , https://www.circularmachine.com