Bathtub maintenance in case of scratch how to do

The bathtubs currently on the market are mainly acrylic, steel plates and cast iron. Cast iron bathtub is durable, high gloss, good acid and alkali resistance, but due to the limitations of materials and craftsmanship, styles are relatively small, heavy, difficult to handle, installation; steel bathtub is resistant to wear, smooth surface, easy to clean, but not resistant to impact The general insulation is not very good; Acrylic bathtub can have many shapes, good insulation effect, easy to clean, and moderate price, but because the surface hardness is lower than cast iron and steel plate cylinder, the surface is easy to produce scratches. However, imports of high-brightness, high-intensity sanitary acrylic sheet, to some extent overcome some of the shortcomings of acrylic.
The acrylic bath surface of the big brand is specially treated and has better abrasion resistance than the acrylic bathtub. If accidental scratches occur on the surface, if the scratches are light, use a toothpaste and a toothbrush to brush lightly. If the scratches are deep, it is advisable to seek professional advice. Professional repair personnel are required to dispose of them.

Use a bathtub to pay attention to maintenance, which can extend the life of the bathtub, but also to maintain a bright appearance: clean the bathtub once a week, to ensure that the bathtub is dry after each use; use a neutral liquid detergent and flexible cloth or good sponge to clean the bathtub, Do not use cleaners that contain abrasives, strong acids, or alkalis; do not leave metal objects in the bathtub. They can cause the bathtub to rust and soil the surface. In addition, the use of soda powder to eliminate dirt is also good.

If the surface of the bathtub has severe scratches, customers may be advised to refurbish it by consulting a professional or requesting professional service personnel.

Bathtub polishing process:

According to the degree of scratching, choose different numbers of sandpaper (such as 800, 1000, 1500, etc.). If the scratches are deep, you need to use a blade and then use sandpaper. The last sandpaper used is generally 1500 or 2000.

The sand process requires water, ie water mill. And there are requirements in the direction of the grinding process. The final polishing uses special wool polishing wheels and special polishing agents.

Bathtub lighting brand

2D Foldable Desktop Barcode Scanner

Desktop Barcode Reader,Industrial Barcode Reader,Portable Barcode Scanner,Foldable Desktop Barcode Scanner

Guangzhou Aigather Intelligent Technology Co., Ltd. , https://www.aigathergz.com