Buy laminate flooring, pay attention to the brightness and hardness of the surface layer and the bottom layer.
First look at the surface layer: The material of the surface layer is mainly aluminum oxide or melamine, and the abrasion resistance of aluminum oxide is superior to that of melamine. The “wear resistance rotation number†reflecting the wear resistance of the composite floor is determined by the density of aluminum oxide. The denser the distribution of aluminum oxide, the higher the number of rotations of the floor wear. Of course, the price will go up.
Second, look at the bottom layer and the interlayer: The main role of the bottom layer is in the dry, wet, cold, heat, tide and other ground surface, there is a barrier effect, no deformation, no rise, no warping, no penetration. The sandwich material is wood fiber, sawdust, wood shavings, etc. Its shape is, for example, particleboard or fiberboard, and it is to be observed whether or not it is firmly pressed.
The third is to see if the tongue and groove fit and slide are smooth and easy, whether the bite is tight, whether the substrate is strong, whether the color is true and natural, etc. This you can observe and compare by yourself. Another point that cannot be ignored is whether the content of formaldehyde is too high. After pavement, the content of formaldehyde is too high and harmful to human health. The level of formaldehyde is determined by hand, and it is judged only by smelling the pungent. These are the factors that truly reflect the technological content and process level of composite flooring.
In the consumption of laminate flooring, a misunderstanding must be taken: The higher the wear resistance, the more durable it is. In fact, the wear resistance and wear resistance are not directly proportional. The overlying distribution of Al2O3 on the composite floor will make the floor brittle and the toughness and flexibility will be reduced. This will, of course, affect the service life of the floor and affect the transparency and gloss of the floor surface. According to European standards, it is sufficient to use more than 4500 revolutions of wear resistance in general household laminates. The wear resistance of composite flooring does not mean that it is durable. Do not believe that the advertisements of businesses are misleading.
The paint resistance of general solid wood flooring is 400*800 rpm, and the composite floor can now be up to 30,000 rpm. On the current market, the general wear-resisting revolutions are around 8,000 rpm, and the key lies in whether the base material is sturdy or not, whether it is the standard, and whether the formaldehyde content is higher or lower.
Flooring purchase formaldehyde paint
The HVLP Electric Paint Spray Gun make painting and varnishing much easier, with 30000 rpm speed,18Kpa working pressure.
The material flow can be controlled by the switch.
The Electric Paint Gun can spray 200DIN Latex paint, the atomization function will be best when using the 45-60DIN Latex Paint.
The material consumption speed is 866ml/min,when spray the Latex paint with 2.6mm Nozzle.
Paint with the HVLP Paint Sprayer, easy to paint the hard-to-reach areas and no need to clean the rollers and brushes.
Working close to the ground and painting overhead are easy for the Electric Paint Spray Gun.
You can spray on paint, varnish and glaze quickly, evenly and cleanly using as little material as possible – and it's also kind to your back, neck and shoulders.
Hvlp Paint Spray Gun,Cordless Paint Spray Gun,Electric Paint Sprayer,Airless Paint Gun
Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com