>>>Links: Details of the decoration wiring process and acceptance method
floor
1. The floor should be polished smooth, no pits or scratches, no grinding at the corner;
2. The floor should use at least 3 times of wax oil;
3. When laying, set aside a certain distance of the space, and then cover with the skirting line;
4. The wooden floor should use plywood as the bottom, the bottom of the board should be placed with oil-proof paper or plastic film, and the four sides should be reserved.
ceramic tile
1. The brick surface must be flat, the angle must be accurate, and the interface must be aligned;
2. The tiles are immersed in water for half a day before use;
3. The toilet floor should have an appropriate slope, not water;
4. After the tile interface is cleaned with white cement, the white cement should be brushed with rattan, and no cement stains can be left on the tile surface;
5. Cover the brick surface with cardboard, etc. after laying the tiles.
wallpaper
1. Firstly apply the waterproof oil once. When sanding, use sandpaper to grind every time. The gap must be repaired immediately so that the recessed position of the convex wall cannot be seen with the naked eye.
2. The wallpaper meets the mouth to be accurately put on the clothes, does not have the bubbling, according to the stipulation to the flower, uses the sharp knife to cut, must not have the paper edge torn the phenomenon.
paint
1. The surface color is correct, uniform, bright and smooth, no teardrops, thick, bottom, blisters, etc.;
2. The paint is straight and tidy and the oil cannot be out of bounds;
3. Latex paint should not see the traces at close range;
4 wooden nail coloring should be accurate and smooth;
5. Try not to paint on wet weather.
In addition, the wooden board surface should be smooth and smooth, without planing marks, squeaks and burrs, the pattern is clear, the paint surface color is uniform, the gap is tight, the joints are staggered, the surface is clean, and the joints are straight and straight. In terms of bonding, it should be firmly bonded, the surface should be clean, there should be no overflowing glue, and the floorboards should be arranged reasonably and beautifully. The joints are tight, the surface is smooth, the seams are arranged in a reasonable and beautiful manner, the mouth is straight, and the cutting angle is accurate.
Construction Acceptance Paint Cement Latex Floor Tile Tile Floor Tile
Concealed Shower Set,Concealed Shower Mixer Set,Concealed Mixer Shower Set,Fitting A Concealed Shower
Kaiping Rainparty Sanitary Ware Technology Co.,Ltd. , https://www.helin-shower.com