The airport communication cable is equipped with first-class integrated circuits and amplifiers. The filtering device on the sound channel of the cable fault location instrument minimizes interference noise while enhancing the sound produced by the arc. The liquid crystal display can display the sound pulse and magnetic pulse at the same time and the distance of the fault point from the probe test point. In this way, the fault point is commonly judged by monitoring the change of the underground sound and the display distance. Instead of using more than 65 kilograms of test transformers and operation boxes, it also solves the cumbersome field wiring when testing cables. In the cable fault test, it can output high voltage of 35KV at such a high frequency, filling a gap in the field of domestic cable fault testing, making cable fault testing so simple and safe.
The main feature of the communication cable <br> <br> Airport Airport communication cable outer conductor in the extrusion (winding) insulation package, such as overhead insulated cable, twisted or several cores (corresponding to the power system phase, neutral and ground) E.g. Over two cores overhead insulated cables, or additional sheathing layers, such as plastic/rubber sheathed wires and cables. The main process technologies include drawing, stranding, insulation extrusion (wrapping), cabling, armoring, sheath extrusion, etc. There are certain differences in the different process combinations of various products. The products are mainly used in the transmission of electricity, electricity, electricity, electricity, electricity and electricity in high-voltage transmission lines, with large currents (tens of amps to several thousand amps) and high voltages (220V to 500kV and above). The variety of airport communication cables is extensive, with a wide range of applications. The use voltage is more than 1kV, and new products such as fire-resistant cables, fire-retardant cables, low-smoke halogen-free/low-smoke and low-halogen are constantly being developed for special occasions. Cables, termites, rat-proof cables, oil/cold/temperature/wear resistant cables, medical/agricultural/mineral cables, thin-walled wires, etc.
Notes on the use of airport communication cables 1. The ambient temperature during cable installation is not lower than -5°C;
2. The minimum bending radius when laying cables should not be less than 15 times of the cable outer diameter;
3, cable tray only allows a short distance fixed single direction rolling, no flat;
4. When the cable enters the pipeline, attention should be paid to reducing the friction between the cable and the pipe wall. When the cable enters the manhole, the bending radius should not be less than the radius of the cable tray, and friction with the edge of the inlet hole should be avoided.
5, when the cable is running, it should be filled with a certain pressure of dry gas (dry air of 30~50kpa has been rushed into the factory)
6, the working temperature of the cable is -30 °C ~ +60 °C.
The main feature of the communication cable <br> <br> Airport Airport communication cable outer conductor in the extrusion (winding) insulation package, such as overhead insulated cable, twisted or several cores (corresponding to the power system phase, neutral and ground) E.g. Over two cores overhead insulated cables, or additional sheathing layers, such as plastic/rubber sheathed wires and cables. The main process technologies include drawing, stranding, insulation extrusion (wrapping), cabling, armoring, sheath extrusion, etc. There are certain differences in the different process combinations of various products. The products are mainly used in the transmission of electricity, electricity, electricity, electricity, electricity and electricity in high-voltage transmission lines, with large currents (tens of amps to several thousand amps) and high voltages (220V to 500kV and above). The variety of airport communication cables is extensive, with a wide range of applications. The use voltage is more than 1kV, and new products such as fire-resistant cables, fire-retardant cables, low-smoke halogen-free/low-smoke and low-halogen are constantly being developed for special occasions. Cables, termites, rat-proof cables, oil/cold/temperature/wear resistant cables, medical/agricultural/mineral cables, thin-walled wires, etc.
Notes on the use of airport communication cables 1. The ambient temperature during cable installation is not lower than -5°C;
2. The minimum bending radius when laying cables should not be less than 15 times of the cable outer diameter;
3, cable tray only allows a short distance fixed single direction rolling, no flat;
4. When the cable enters the pipeline, attention should be paid to reducing the friction between the cable and the pipe wall. When the cable enters the manhole, the bending radius should not be less than the radius of the cable tray, and friction with the edge of the inlet hole should be avoided.
5, when the cable is running, it should be filled with a certain pressure of dry gas (dry air of 30~50kpa has been rushed into the factory)
6, the working temperature of the cable is -30 °C ~ +60 °C.
Fence gate contains: single gate, Double gate, Sliding Gate, farm gate
Farm gate contains: Wire filled farm gate, pipe filled farm gate, chain link wire mesh farm gate
Surface treatment: powder coating, hot dip galvanized
Fence gate specification:
wire diameter: 4mm, 5mm
hole size: 50*200mm, 55*200mm, 75*150mm
frame pipe: 40*60mm*1.5/2.0mm
gate size: 1/1.2m*1.2/1.5/1.8m, 1.8m*3/4m
Post size: 60*60mm*2/2.5mm, 80*80mm*2/2.5mm
Farm gate popular in Austrialia, European countries, Canada, America and Asia market
Fence gate
Iron Slide Fence Gate,Double Fence Gate,Single Fence Gate,Iron Single Fence Gate
Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl