Everyone knows that there are many pipes on the roof or on the wall. It is always unsightly and unsafe to be exposed, so it needs to be packaged. Many friends found the decoration team to do the bathroom management , but because of the wrong process, there are always many hidden problems. Let's let the decoration home decoration network Xiaobian to introduce the process of bathroom packaging tube for everyone!
1. The bathroom should first be tested for water shut-off, check the waterproof layer of the wall and pull the hair to repair the defects. Dry the floor and clean it.
2, the wall is made of waterproof, on both sides of the three sides of the wall, the cross is painted separately. Brush the second side after doing it.
3, the ground should do a good protective layer, the wall is used for brushing.
5. The pipe of the bag is made waterproof and pulled. Then, spread the wall again.
Such a process refers to the inside of the riser tube, and the wall surface is also waterproof. The outer layer of the pipe is covered with a waterproof layer to achieve waterproof requirements. Otherwise, a pipe of water will fall downstairs.
The above is the renovation of the home decoration network Xiaobian for everyone to introduce the process of bathroom packaging , I hope that everyone can be used as a reference when doing bathroom management! More exciting content, all in the decoration encyclopedia!
Digital Tape Measure,Laser Measure Tapes,Laser Digital Measure Tape,Digital Display Laser Measure Tapes
Shangqiu Hengli Measuring Tools Co.,Ltd , https://www.henglimtools.com