The toilet is the sanitary ware we use every day in our daily life, but few users will study the toilet inlet valve. What is the principle of the toilet inlet valve ? Today we will introduce the relevant content below, Let's take a look at the principle of the toilet inlet valve !
Principle of toilet inlet valve
If you have bought the toilet inlet valve or opened the water tank, you will find that the surface of the inlet valve has a circle of threads. In fact, this design is to adjust the height. Due to the different manufacturers of the toilet, the height of the toilet is not complete. Unification, there are high and low differences. So we can adjust this by rotating this thread and pushing it up or down. The blue cover of the inlet valve is used to control the water flow and is responsible for opening and closing the toilet, but it needs to be operated with a rocker. When the water flow enters the blue cover in the valve, if it does not reach a certain height, it will always enter the water. However, after the water is full, the lid is pushed up by the buoyancy of the water, and the rocker is controlled.
What to do if the toilet inlet valve does not stop water
1. If you find that the toilet inlet valve has been unable to stop the water, you need to slowly drain the water from the toilet tank until it reaches the drain. Observe with the naked eye again to see if the place where the water is flushing will leak. If there is a water leak, it means that there is a crack in the water tank. If there is no water leak, you need to open the triangle valve and put the water on the drain, to see if there is a water leak problem when the toilet enters. They all need to be reviewed and cannot be ignored, otherwise it is difficult to find out the reason.
2. Next, check whether there is a clogging problem inside the toilet inlet valve, whether there is foreign matter, if there is, it is likely that the object is pressurizing the top of the inlet valve, causing the inlet valve to stop water. If this kind of situation is encountered, it is more complicated to handle, and the user cannot repair it by himself. It is recommended to find a local professional toilet master to repair it.
3. Interval time cleaning is also very helpful to the toilet water inlet valve to stop water, which can effectively reduce the occurrence of water stop phenomenon. Before cleaning, the water in the water tank needs to be completely cleaned, which is convenient for us to clean. For the inlet valve, it is best to remove it for cleaning, carefully remove each part, use a special detergent for cleaning, and then dry it, and then assemble the inlet valve.
Regarding the principle of the toilet inlet valve , I will briefly introduce it here, I hope to help you. In fact, in daily use, pay more attention, you can effectively avoid these toilet failure problems. If you want to know more about decoration, you can pay attention to the information on this website, more exciting content is waiting for you.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
The toilet inlet valve principle
Carbon Steel Cross,Equal Carbon Steel Pipe Cross,Equal Butt Welding Connection Cross,Forged Malleable Casting Iron Cross
Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.youlongpipe.com