Tiles are used very much in our decoration, so we don't give up on the tiles of the wrong size, but use the cutter to make it look the right size and then continue laying. For tiles that are lacking in shape, it is also cut off with a cutter compared to the model. Then everyone will follow the Xiaobian together to see the relevant content of tile cutting .
First, the tool raw materials
ceramic tile
Cutting knife
Second, the step method
Move the ruler to select the cutting size, hold the operation handle with one hand, pull the cutter wheel position to the rear seat, place the tile flat on the bottom plate and align the tile cutting line with the bottom plate beam. The front end of the tile should be close to the gap of the bottom plate. unit.
1. If necessary, unfold the bracket, lower the handle to bring the cutter wheel into contact with the tile surface, and push the handle forward so that the cutter wheel cuts a continuous straight line on the tile surface.
2. Raise the operating handle slightly back to allow the clamp to rest smoothly on the front of the tile. Press the handle down with the appropriate force and the tile will break along the score line.
Third, matters needing attention
Whether the line is uniform, continuous, and clear from beginning to end, can you cut the key to the tile. The cutter wheel is made of a special super-hard alloy and its hardness far exceeds the hardness of the tile surface. Therefore, in general, by holding the handle with a small force and gently pushing the cutter wheel, a cutting line can be drawn on the surface of the tile.
In the process of cutting the tile, as long as the force is not on the line, this is the same as breaking the glass. Excessive force scribing not only makes the cutting line become jagged, but also makes the ultra-hard alloy yellow blade of the cutter wheel collapse, which greatly shortens the normal service life of the cutter wheel.
If you want to spread a large area indoors, the current hand-held power tools can not meet the accuracy requirements, and the half-brick cut out by the workers with the best technology can also avoid the burrs. This is unavoidable.
If you really want this effect, you need to go to the factory to customize the processing, and the cost is higher.
Fourth, the tile cutting calculation fee case
I recently bought a bathroom and a tile in the living room at a ceramic tile shop in Nantong. I asked for the cost of cutting before I bought it. The store said that it costs five yuan a meter. Last weekend they measured the size and let me pay for it. After paying the money, I cut it. A look at cutting Fitch high, ask them how to calculate, they said that a 80*80 tile cut into four 40*40 costs 32 yuan, they are such: 0.4 * 4 * 4 * 5 = 32 yuan , 0.4*4 is a 40*40 perimeter. Is there such a calculation? There is 3.2 meters (0.8*4), and I have to collect money at all. The store said that it is such a calculation, too embarrassing!
How about, I saw the wonderful introduction to the tile cutting above. Did you understand a lot of related content of tile cutting? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
The advantages of tile cutting equipment
Is the tile cutting and edging machine good? Cutting and edging machine
Aluminum Fume Exhaust,Aluminum Fume Exhaust System,Lab Aluminum Fume Exhaust,Laboratory Aluminum Fume Exhaust
NARWILL IMPORT&EXPORT CO.LTD , https://www.narwill.com