Algorithm for wallpaper usage:
1. First calculate how many pieces of wallpaper can be cut:
Algorithm: length of the wallpaper / (height of the room + distance of the flower) = the number of pieces that can be cut per roll
For example: to buy a wallpaper of 0.53*10 meters, the room height is 2.6 meters.
10/2.6=3.8 (here you choose to remove the decimal = 3)
Remarks: The general layer height is between 2.4m and 3.1m, and a roll of wallpaper can be cut into 3 pieces.
2. How many wallpapers are needed:
Algorithm: room perimeter / wallpaper width = required number of frames
For example: still choose 0.53 * 10 meters of wallpaper, the room circumference is 18 meters (the circumference is after the width of the door and window)
18/0.53=33.96 (this is going to be rounded up = 34)
3. Folded volume:
Algorithm: the number of wallpapers required / the number of sheets that can be cut per roll of wallpaper = number of volumes
For example: the above requires 34 wallpapers / 3 = 11.33 volumes (to make up 12 volumes here)
4. Summary: Measure the height of the wallpaper (normal between 2.4-3.1 meters), and then measure the total width of the wall covering the wallpaper (to deduct the width of the door and window, the door and window are normal, the door and the window The remaining wall area on the upper and lower sides is not large.) The number of rolls of the wallpaper used = total width / width of the wallpaper / number of rolls of wallpaper. For example: the international standard for flower wallpaper, width 0.53*10 meters long, the total width is 12.6 meters, the wallpaper should be 2.56 meters high, the number of wallpaper rolls = 12.6 / (0.53 * 3) = 7.92 (rounded, to 8 Roll wallpaper)
5: Plain color without pattern wallpaper wall height below 2.4, can be cut 4. 0.53 wide can be attached 2.12 wide wall
Guangdong Jishengke Industrial Co., Ltd. , https://www.suronart.com