Xiaobian wants to tell everyone a good news. When you put the putty on the wall in the future, you can use the wall automatic scraping putty machine . What friends will ask is the wall automatic scraping putty machine? Then our small series says What are the processes of the wall automatic scraping putty machine, what is the working principle of the wall automatic scraping putty machine, and what is the use of this wall automatic scraping putty machine?
First, the wall surface automatic scraping machine works
1. Turn on the power and press the button to start the screw pump. If the steering is reversed, press the stop button to stop. Adjust the power and change the steering. If it is in the opposite direction, it will not be discharged.
2. Inject a small amount of water into the inlet of the conveying hose, or pump the water with a screw pump to wet the conveying hose, and then gradually discharge the water in the tube from the outlet. The drainage should be clean and no residual water should remain in the pipe.
3. Put the material that is evenly mixed into the hopper. Press the start button, and the shotcrete work will start. When working, combined with adjusting the air volume, the spray quality can be better.
4. The mixing material must be added continuously in the hopper to ensure the continuity of the spraying work.
5. Before the end of the spraying work, stop the machine after the remaining material in the hopper is sprayed. Remove the gun and disassemble the parts and clean them one by one. 6, inject 50 kg of water into the hopper, start the pump water to clean. After the nozzle has flowed out of the clear water, remove the transfer hose and roll it up.
Second, the wall surface automatic scraping machine function
The internal wall automatic scraping putty machine actually acts as a fast feeding device, and the putty is quickly and evenly sent to the wall surface, and then the artificial spraying is performed manually. The machine that directly forms the putty putty needs to be controlled by people. The current technology is developing this kind of product that completely replaces the artificial, but the quality of the project still depends on the human being. Only the inner wall of the putty request is Higher, so the effect of using putty is also very good, the wall surface is smoother, and the work efficiency is several times faster than the manual putty.
Third, the wall surface automatic scraping machine using
1. Turn on the power and press the button to start the screw pump. If the steering is reversed, press the stop button to stop. Adjust the power and change the steering. If it is in the opposite direction, it will not be discharged.
2. Inject a small amount of water into the inlet of the conveying hose, or pump the water with a screw pump to wet the conveying hose, and then gradually discharge the water in the tube from the outlet. Drainage should be clean, no residual water should be left in the pipe. 3 Stirring material should be loaded into the hopper. Press the start button, the shotcrete work will start. When working, combined with adjusting the air volume, the spray quality can be achieved.
3, the wall automatic scraping putty machine maintenance, inject 50 kg of water into the hopper, start pump water cleaning. After the nozzle has flowed out of the clear water, remove the transfer hose and roll it up. Maintenance and maintenance Every time the cleaning is completed, a little silicone oil lubrication and anti-embroidery must be added. The purpose is to protect the core from rust and to start smoothly after the next use.
4. When the machine is working, the electric box door must be closed and locked to prevent dust and moisture from invading. When cleaning the machine, the electric box part can only be wiped, not flushed, and the gearbox oil is often checked.
What are the functions of the wall automatic scraping putty machine and what is the working principle? What are the correct ways to use this wall automatic scraping putty machine? The friends have already introduced what is the wall automatic scraping putty machine through the article content. Understand, then there is any decorative information in the future, friends can come to pay attention to the decoration home network, I hope to help everyone.
End Mill For Carbon Fiber Composite Material
End Mill For Carbon Fiber Composite Material, Cvd Coated Cutting Tools,Tungsten Carbide Endmills, Multi Teeth End Mills
JIANGYIN GOLD STAR INDUSTRY CO.,LTD , https://www.jygoldstarindustry.com