V Press Fittings Bend 90 Degree Male Threaded End Stainless Steel

The stainless steel press V-profile fittings are manufactured and tested according to (DIN) DVGW W534-1995, materials are available to stainless steel 304L, stainless steel 316L and galvanized carbon steel. The press fitting sizes from 15mm up to 108mm with EPDM and FKM O-Ring which can be used a wide range of application, like Drinking water, Heating, 
Cooling Water, Building, Chemical and so on. 





TECHNICAL DATA
*Basic Principle Of Stainless Steel Press Profile fittings. 

1, Principle of leak-proof and sealing: The stainless steel press type fitting is filled with O-ring seals in a radial contraction, which is leaky and water-stopping, instead of leak-stopping. 
2, Principle of resistant extraction: The middle position of the stainless steel press type fitting is small, but the two ends are large, and the pullout is >3.0MPa. 
3, Principle of anti-rotation: The stainless steel press fitting and tube are pressed into a hexagon and cannot be rotated. 


Preview Press fittings stainless steel












O-Ring EPDM and FKM


The EPDM O-Ring is tasteless non-toxic, also it has excellent antioxidant, , heat and cold resistance, ageing resistance, It can be used for long time in normal working temperature is -20° degree to 110° degree. 
Most of the FKM O-Ring is used at at high temperature working environment, for heat, steam, working temperature is -20° degree to 205° degree. 





Advantages of Stainless Steel Press Fittings

*Material performance superiority. 
*Advantages of environmental protection
*The superiority of connection technology
*The superiority of appearance
*Cost-effective superiority
*Quick connection and safe installations
*Remarkable corrosion resistance
*Superior crush resistance

Contact Us

Mr. Peter

Mobile: +86-13777772065
Website: HTTP: //chinapressfittings. COM

Address: No. 2869, YongQing Avenue, ShaCheng Street, Economic And Technological Development Zone, ZheJiang Province, China


Related Products
M Profile Press fittings and V profile press fit fittings
Coupling, Equal coupling, Reducing coupling, adaptor with female threaded end, adaptor with male threaded end, coupling with threaded end; 90 degree bend & elbow, 90 degree bend with female threaded end, 90 degree bend with male threaded end, reducing elbow, 90 degree bend with plain end, 45 degree elbow with screw end; 
Press Tee, equal tee with female threaded end, equal tee with male threaded end, jpress reducing tee, flanged adator press fittings. Press short elbow, press pipe fittings, press pipe tube, custom made press fittings.  The stainless steel press V-profile fittings are manufactured and tested according to (DIN) DVGW W534-1995, materials are available to stainless steel 304L, stainless steel 316L and galvanized carbon steel. The press fitting sizes from 15mm up to 108mm with EPDM and FKM O-Ring which can be used a wide range of application, like Drinking water, Heating, 
Cooling Water, Building, Chemical and so on. 





TECHNICAL DATA
*Basic Principle Of Stainless Steel Press Profile fittings. 

1, Principle of leak-proof and sealing: The stainless steel press type fitting is filled with O-ring seals in a radial contraction, which is leaky and water-stopping, instead of leak-stopping. 
2, Principle of resistant extraction: The middle position of the stainless steel press type fitting is small, but the two ends are large, and the pullout is >3.0MPa. 
3, Principle of anti-rotation: The stainless steel press fitting and tube are pressed into a hexagon and cannot be rotated. 


Preview Press fittings stainless steel












O-Ring EPDM and FKM


The EPDM O-Ring is tasteless non-toxic, also it has excellent antioxidant, , heat and cold resistance, ageing resistance, It can be used for long time in normal working temperature is -20° degree to 110° degree. 
Most of the FKM O-Ring is used at at high temperature working environment, for heat, steam, working temperature is -20° degree to 205° degree. 





Advantages of Stainless Steel Press Fittings

*Material performance superiority. 
*Advantages of environmental protection
*The superiority of connection technology
*The superiority of appearance
*Cost-effective superiority
*Quick connection and safe installations
*Remarkable corrosion resistance
*Superior crush resistance

Contact Us

Mr. Peter

Mobile: +86-13777772065
Website: HTTP: //chinapressfittings. COM

Address: No. 2869, YongQing Avenue, ShaCheng Street, Economic And Technological Development Zone, ZheJiang Province, China


Related Products
M Profile Press fittings and V profile press fit fittings
Coupling, Equal coupling, Reducing coupling, adaptor with female threaded end, adaptor with male threaded end, coupling with threaded end; 90 degree bend & elbow, 90 degree bend with female threaded end, 90 degree bend with male threaded end, reducing elbow, 90 degree bend with plain end, 45 degree elbow with screw end; 
Press Tee, equal tee with female threaded end, equal tee with male threaded end, jpress reducing tee, flanged adator press fittings. Press short elbow, press pipe fittings, press pipe tube, custom made press fittings. 

Panasonic Nozzle

Panasonic Nozzles are used to pick up components from Panasonic SMT Feeders and mounting it to PCB. This SMT Nozzle is specially designed and compatible to Panasonic pick and place machines. Panasonic nozzles have different types for different Panasonic SMT Machine series. The types of Panasonic nozzles include nozzles for Panasert, NPM, and KME machine types. For more information about Panasonic Nozzles, kindly visit our official website or contact us.

Panasonic nozzle types,Panasonic BM nozzle, Panasonic Nozzle Holder,Panasonic SMT Nozzle,Panasonic MSR Nozzle, Panasonic CM602 Nozzle

ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com