Model NO.: profile06
Surface Finishing: Anodic Oxidation
Alloying Ingredient: 6063
Certification: CE, SONCAP, ISO, CIQ, RoHS, TUV
Polished Aluminum Profile: Profile
Length: 5.8m-6m
Surface Finish: Anodized
Warranty: 10 Years
Extruder Size: 1800tons
Webster Hardness: 8-12 Hw
Hollow: No
Color: Sliver
Anodizing Film: 8-10 Micron
Usage: Electronic Frame
Fabrication: Precious Cutting,Milling, Drilling,Tapping,Thread
Trademark: FINE
Transport Package: Protective or Customized
Specification: 6063-T5
Origin: Foshan
HS Code: 7604210000
Model NO.: profile06
Surface Finishing: Anodic Oxidation
Alloying Ingredient: 6063
Certification: CE, SONCAP, ISO, CIQ, RoHS, TUV
Polished Aluminum Profile: Profile
Length: 5.8m-6m
Surface Finish: Anodized
Warranty: 10 Years
Extruder Size: 1800tons
Webster Hardness: 8-12 Hw
Hollow: No
Color: Sliver
Anodizing Film: 8-10 Micron
Usage: Electronic Frame
Fabrication: Precious Cutting,Milling, Drilling,Tapping,Thread
Trademark: FINE
Transport Package: Protective or Customized
Specification: 6063-T5
Origin: Foshan
HS Code: 7604210000
Good Surface Treatment of Aluminum Profiles for Industrial In Foshan
Advantages of our company:
(1)Owe 600-4000 tons extruders.We could produce big size of profile.
(2)Monthly production capacity:4000 tons.
(3)99.9% raw aluminum ingot.General ALLOY:6063,6063A,6061,6005,6005A,6060,6082,6463.
   We accept small QTY for special alloy.
(4)Customized product efficiently base on your request.Sample production time:3-5days.
(5)We use SLOW WIRE BURN MOLD for normal profile and ALLOY MOLD for tube.
| VSÂ Â ITEM | FINE METAL | Other company |
| Material | 99.9% raw aluminum ingot.General ALLOY:6063,6063A,6061,6005,6005A,6060,6082,6463.We accept small QTY for special alloy. | May use recycle aluminum ingot.General ALLOY:6063,6061,6463.Other factory also accept customized alloy services,but the MOQ need 20 tons. |
| Customized services | Customized product efficiently base on your request.Sample production time:3-5days. | Many procedures.Sample production time:7-15days. |
| Mold quality | SLOW WIRE BURN MOLD for normal profile and ALLOY MOLD for tubes in order to produce less machinery line products. | FAST WIRE BURN MOLD.Cheaper mold cost but will produce rough profile surface. |
| QC quality standard |
Powerful quality control standard which will higher than SUPER HIGH QUALITY LEVEL of GB5327-2008.We can reach 0.05MM tolerance. Â |
GB5237-2008 Chinese Standard.Other factory can reach 0.13MM tolerance. |
| CNC fabrication | 6500MM long CNC machine,we can produce under 6500mm length products. | CAN'T produce longer than 850mm long profile. |
| Precious cutting | Precious Auto-cutting machine,Accuracy:±0.05MM | Normal cutting machine.Accuracy:±5MM |
| Pre-treatment of anodizing | We can provide sandblasting / polish / brush for small profile in our factory. | Need outsourcing. |
| Surface finish | Feature | ||
| Mill finish | Raw material for secondery surface treatment.Natural aluminum material,without any coating.Cheaper cost.The aluminum profile itself will forms a weak oxide film in the air-- Have weak corrosion resistance.Mill finish normal suitable for industry product like heat sink etc. | ||
| Powder coating | Electrostatic spraying,the powder can cover profile,smooth surface,durable.The film thickness normal have 60-120μm.It can protect the surface from corrosion.Available in all kinds of color. | ||
| Suitable for outdoor usage. | |||
| Anodizing | Oxidation film thickness normal is 8-12μm,durable,corrosion-resistant,less machinery line.Avaliavle in planty of color,such as:sliver,champange,bronze,black,steel,golden etc. | ||
| Customized color also avaliable. | |||
| Wooden grain | Transform texture like real wood on profile surface,without mechanical lines, corrosion-resistant,durable.Avaliable in all kins of wooden pattern,3D/4D wooden grain,powder coating wooden and electrophoresis wooden grain. | ||
| Electrophoresis | There is a transparent electrohporesis film on surface.20 years quality assurance,with smooth surface, highly-wear resistance,corrosion-resistant,durable.Avaliavle in planty of color,such as:sliver,champange,bronze,black,steel,golden etc.Customized color also avaliable. | ||
| Suitable for outdoor usage. | |||
| PVDF coating | Fluorocarbon spraying,PVDF paint does same as car painting.20 years quality assurance,with smooth surface, highly-wear resistance,corrosion-resistant,durable.Avaliavle in all kinds of color.Customized color also avaliable.Suitable for outdoor usage. | ||
| Sandblast | Pre-treatment for anodizing.Use sand impact on profile surface,it can cover machinery line.Suitable for decoration.Avaliable in all kinds of sand such as quartz sand,steel sand etc. | ||
| Brush | Pre-treatment for anodizing.Even brush on profile surface,it can cover machinery line. | ||
| Suitable for decoration. | |||
| Polish | Pre-treatment for anodizing.By buffing and chemical anodizing to form the surface like mirror.Suitable for decoration,use for indoor product. | ||
Specifications:
| Aluminum alloy | General alloy:6063,6063A,6061,6005,6005A,6060,6082,6463 etc. |
| Special alloy:5052,5050,etc | |
| Temper | T0,T3,T4,T5,T6,T66 etc |
| Standard | GB5237-2008 Chinese Standard |
| Surface Finish | Mill finish |
| Sandblasting | |
| Polishing | |
| Brushing | |
| Anodizing:Normal Color , Customized Color | |
| Electrophoresis:Normal Color , Customized Color | |
| Power coating: Normal Color , Customized Color | |
| Fluorocarbon Coating/PVDF Coating: Normal Color, Customized Color | |
| Wood Imitation: Normal Color, Special Color,3D wooden grain | |
| Fabrication Abilities | Precious Cutting,Drilling,Tapping,Milling,Punching,Bending,Welding.etc |
| Payment terms | 30% deposit before starting order,70% Balance before shipping by TT. |
| Packing | EPE,Kraft Paper,Protect film,Shrink film,Wooden frame,Iron Car |
| Production time | 15-30days after sample confirmation & payment arrival |
| Chemical element (%) | Alloy | |||
| 6063 | 6061 | 6005 | 6463 | |
| Silicon/Si | 0.2~0.6 | 0.4~0.8 | 0.6~0.9 | 0.2~0.6 |
| Lron/Fe | ≤0.35 | ≤0.7 | ≤0.35 | ≤0.15 |
| Copper/Cu | ≤0.1 | 0.15~0.4 | ≤0.1 | ≤0.2 |
| Manganese/Mn | ≤0.1 | ≤0.15 | ≤0.1 | ≤0.05 |
| Magnesium/Mg | 0.45~0.9 | 0.8~1.2 | 0.4~0.6 | 0.45~0.9 |
| Chromium/Cr | ≤0.1 | 0.04~0.35 | ≤0.1 |  |
| Zine/Zn | ≤0.1 | ≤0.25 | ≤0.1 | ≤0.05 |
| Titanium/Ti | ≤0.1 | ≤0.15 | ≤0.1 |  |
| Other(Each) | ≤0.05 | ≤0.05 | ≤0.05 | ≤0.05 |
| Others(Total) | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 |
| Aluminum/Al | Surplus | Surplus | Surplus | Surplus |
 Good Surface Treatment of Aluminum Profiles for Industrial In Foshan
Advantages of our company:
(1)Owe 600-4000 tons extruders.We could produce big size of profile.
(2)Monthly production capacity:4000 tons.
(3)99.9% raw aluminum ingot.General ALLOY:6063,6063A,6061,6005,6005A,6060,6082,6463.
   We accept small QTY for special alloy.
(4)Customized product efficiently base on your request.Sample production time:3-5days.
(5)We use SLOW WIRE BURN MOLD for normal profile and ALLOY MOLD for tube.
| VSÂ Â ITEM | FINE METAL | Other company |
| Material | 99.9% raw aluminum ingot.General ALLOY:6063,6063A,6061,6005,6005A,6060,6082,6463.We accept small QTY for special alloy. | May use recycle aluminum ingot.General ALLOY:6063,6061,6463.Other factory also accept customized alloy services,but the MOQ need 20 tons. |
| Customized services | Customized product efficiently base on your request.Sample production time:3-5days. | Many procedures.Sample production time:7-15days. |
| Mold quality | SLOW WIRE BURN MOLD for normal profile and ALLOY MOLD for tubes in order to produce less machinery line products. | FAST WIRE BURN MOLD.Cheaper mold cost but will produce rough profile surface. |
| QC quality standard |
Powerful quality control standard which will higher than SUPER HIGH QUALITY LEVEL of GB5327-2008.We can reach 0.05MM tolerance. Â |
GB5237-2008 Chinese Standard.Other factory can reach 0.13MM tolerance. |
| CNC fabrication | 6500MM long CNC machine,we can produce under 6500mm length products. | CAN'T produce longer than 850mm long profile. |
| Precious cutting | Precious Auto-cutting machine,Accuracy:±0.05MM | Normal cutting machine.Accuracy:±5MM |
| Pre-treatment of anodizing | We can provide sandblasting / polish / brush for small profile in our factory. | Need outsourcing. |
| Surface finish | Feature | ||
| Mill finish | Raw material for secondery surface treatment.Natural aluminum material,without any coating.Cheaper cost.The aluminum profile itself will forms a weak oxide film in the air-- Have weak corrosion resistance.Mill finish normal suitable for industry product like heat sink etc. | ||
| Powder coating | Electrostatic spraying,the powder can cover profile,smooth surface,durable.The film thickness normal have 60-120μm.It can protect the surface from corrosion.Available in all kinds of color. | ||
| Suitable for outdoor usage. | |||
| Anodizing | Oxidation film thickness normal is 8-12μm,durable,corrosion-resistant,less machinery line.Avaliavle in planty of color,such as:sliver,champange,bronze,black,steel,golden etc. | ||
| Customized color also avaliable. | |||
| Wooden grain | Transform texture like real wood on profile surface,without mechanical lines, corrosion-resistant,durable.Avaliable in all kins of wooden pattern,3D/4D wooden grain,powder coating wooden and electrophoresis wooden grain. | ||
| Electrophoresis | There is a transparent electrohporesis film on surface.20 years quality assurance,with smooth surface, highly-wear resistance,corrosion-resistant,durable.Avaliavle in planty of color,such as:sliver,champange,bronze,black,steel,golden etc.Customized color also avaliable. | ||
| Suitable for outdoor usage. | |||
| PVDF coating | Fluorocarbon spraying,PVDF paint does same as car painting.20 years quality assurance,with smooth surface, highly-wear resistance,corrosion-resistant,durable.Avaliavle in all kinds of color.Customized color also avaliable.Suitable for outdoor usage. | ||
| Sandblast | Pre-treatment for anodizing.Use sand impact on profile surface,it can cover machinery line.Suitable for decoration.Avaliable in all kinds of sand such as quartz sand,steel sand etc. | ||
| Brush | Pre-treatment for anodizing.Even brush on profile surface,it can cover machinery line. | ||
| Suitable for decoration. | |||
| Polish | Pre-treatment for anodizing.By buffing and chemical anodizing to form the surface like mirror.Suitable for decoration,use for indoor product. | ||
Specifications:
| Aluminum alloy | General alloy:6063,6063A,6061,6005,6005A,6060,6082,6463 etc. |
| Special alloy:5052,5050,etc | |
| Temper | T0,T3,T4,T5,T6,T66 etc |
| Standard | GB5237-2008 Chinese Standard |
| Surface Finish | Shoe Racks,Black Shoe Racks,Shoes Shop Display Rack,Shoes Rack Stand Changzhou Offistyle Furniture Co., Ltd. , https://www.offistyledesks.com |