Selection and application of industrial bearings

Home>Bearing knowledge>Selection summary and application methods of industrial bearings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Selection and application of industrial bearings

Source: China Bearing Network Time: 2013-05-25
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The demand for shopping malls using various mechanical equipment and instruments for rolling bearings is becoming more and more stringent; the conditions and functions required for bearings are becoming increasingly diversified. In order to be able to select the most suitable bearings from a large number of layouts and scales; A kind of viewpoint research. When selecting a bearing; usually; thinking about bearing placement, installation, ease of disassembly, bearing space, scale and bearing mallarity of the bearing; roughly determining the bearing layout. Secondly; On the one hand, we will discuss the various life-threatening limits of the various bearings used in bearings and the different endurance limits of the bearings; while determining the bearing scale. When selecting the bearings; tend to only consider the fatigue life of the bearings; The smooth fat life, wear, noise, etc. of the attack also need to be fully studied. Again; based on different uses; it is necessary to select the requirements for precision, clearance, shelf layout, smooth grease, etc.; However, there are no necessary orders and rules for selecting bearings; the priority should be considered for the conditions, functions, and most relevant requirements for bearings. Term; particularly practice.
â—‹ Conditions and functions required for the bearing â—‹ Operating conditions and environmental conditions â—‹ Some dimensions of the bearing device â—‹ The space that the bearing agrees â—‹ The size of the load, the direction â—‹ oscillation, the impact â—‹ The rotational speed, the limit speed of the bearing â—‹ The inner ring, the outer The skew of the circle â—‹ The fixing of the axial direction and the bearing arrangement â—‹ The difficulty of loading and unloading â—‹ Noise, torque â—‹ Rigid â—‹ Shopping mall, economy, bearing layout, placement â—‹ Use of machinery and drawing life â—‹ equivalent dynamic load or equivalent static load â—‹ Rotation speed â—‹ Allow static load factor â—‹ Accept axial load (in the case of cylindrical roller bearings)
Resolution bearing scale â—‹ Rotational vibrating accuracy â—‹ High-speed rotation â—‹ Torque change resolution Bearing accuracy level â—‹ Cooperation â—‹ Temperature difference between inner ring and outer ring â—‹ Rotation speed â—‹ Deflection of inner ring and outer ring â—‹ Pre-pressure amount resolution (internal) Gap â—‹ Rotation speed â—‹ Noise â—‹ Operating temperature resolution, frame shape, data â—‹ Operating temperature â—‹ Rotation speed â—‹ Smooth method â—‹ Sealing method â—‹ Protection, repair resolution Smooth method, smoothing agent, sealing method â—‹ Loading and unloading order â—‹ Work card mold â—‹ and device Relevant scale resolutions and device-related scale resolution loading and unloading methods Some of the end-of-life considerations around bearings and bearings:
Rolling bearings are fine parts; their use must be carried out in a stable manner. No matter how high-performance bearings are used; if they are not used properly, they will not achieve the expected high functions. The application of the bearings is as follows.
.1), adhere to the bearing and its surrounding health.
Even small dust that cannot be seen by the eyes will have a bad influence on the bearings. Therefore, it is necessary to adhere to the surrounding sanitation; so that the dust does not invade the bearings.
.2), use it cautiously.
In the application, the bearing is strongly impacted; there will be scars and indentations; the cause of the incident. In severe cases; cracks and cracks; so it is necessary to pay attention.
.3), use the appropriate operating things.
Prevent the replacement of existing things; it is necessary to use the right things.
.4), pay attention to the corrosion of the bearing.
When operating the bearing; the sweat on the hand will become the cause of rust. Pay attention to the operation with clean hands; the best possible to wear gloves.
Recommend to friends comments close window

Bearing related knowledge
The characteristics of the sliding bearing The bearing in the preparatory work before the rolling mill bearing device needs to pay attention to what matters the difference between the ball bearing and the roller bearing - SKF bearing type search


This article links to http://
Please indicate the bearing network http://

Previous:New skills of bearing ring grinding and super-processing and its development at home and abroad Next: Analysis of bearing scale accuracy

Piping Accessories

Piping Accessories,Piping Tool Accessories,Pipe Fitting Accessories,Automatic Suction Water Filter

Jiangsu Hida Marine Valve Co., Ltd , https://www.haidavalve.com