Model NO.: KL-HPRH-100R1at
Standards: GB / DIN / SAE
Trademark: KangLong
Transport Package: in Plastic Film or Carton or as You Request
Specification: SGS, CE
Origin: Hebei China
HS Code: 391739000
SAE 100 R1at Steel Wire Braided Hydraulic Rubber HoseProduct details:
Â
Product: braided hose
Model Number:SAE 100R1AT
Inner tube:oil resistant synthetic rubber
Inner Dia.:3/16"-4" for braided hydraulic hose
Reinforcement:one high tensile copper-coated steel wire
Cover:heat,heavy-weather ,fatigue resistant speical synthetic rubber
Impulse:the frequency of braided hydraulic hose above 200,000times
Working temperature:-40°c-+100°C or -70°C-+160°C
Keywords: SAE 100 R1AT steel wire braided hydraulic rubber hose ; SAE 100R1AT hydraulic hose ; Braided rubber hose ; rubber hydraulic hose
SAER100R1AT steel wire braided hydraulic rubber hose tecnical parameter:
Â
|
SAEÂ 100R1Â ATÂ /DINÂ ENÂ 853Â 1SN | ||||||||||
|
Hose I.D |
Wire OD |
Hose OD |
Working Pressure |
Burst Pressure |
Minimum Bend Radius |
Weight |
Length |
|||
|
inch |
mm |
mm |
mm |
MPa |
psi |
MPa |
psi |
mm |
kg/m |
metres |
|
3/16 |
4.8 |
9.5 |
11.8 |
25.0 |
3630 |
100 |
14280 |
90 |
0.19 |
100 |
|
1/4 |
6.4 |
11.1 |
13.4 |
22.5 |
3270 |
90 |
12840 |
100 |
0.21 |
100 |
|
5/16 |
7.9 |
12.7 |
15.0 |
21.5 |
3120 |
85 |
12280 |
115 |
0.24 |
100 |
|
3/8 |
9.5 |
15.1 |
17.4 |
18.0 |
2615 |
72 |
10280 |
130 |
0.33 |
100 |
|
1/2 |
12.7 |
18.3 |
20.6 |
16.0 |
2320 |
64 |
9180 |
180 |
0.41 |
50/100 |
|
5/8 |
15.9 |
21.4 |
23.7 |
13.0 |
1890 |
52 |
7420 |
200 |
0.45 |
50/100 |
|
3/4 |
19.0 |
25.4 |
27.7 |
10.5 |
1530 |
42 |
6000 |
240 |
0.58 |
50/100 |
|
1 |
25.4 |
33.3 |
35.6 |
8.8 |
1280 |
35 |
5020 |
300 |
0.88 |
50/100 |
|
1-1/4 |
31.8 |
40.5 |
43.5 |
6.3 |
920 |
25 |
3600 |
420 |
1.23 |
20 to 40 |
|
1-1/2 |
38.1 |
46.8 |
50.6 |
5.0 |
730 |
20 |
2860 |
500 |
1.51 |
20 to 40 |
|
2 |
50.8 |
60.2 |
64.0 |
4.0 |
580 |
16 |
2280 |
630 |
1.97 |
20Â to40 |
The simplest shape of the reinforcing ring is a rectangular column attached to the surface of the product, but in order to meet some production or structural considerations, the shape and size of the reinforcing ribs need to be changed as shown in the following figure. The position of the bottom of the product must be rounded to eliminate excessive stress concentration. The rounded corner design also gives the runner a gradual shape to fill the cavity with curvature. Problems such as water trapping will also lengthen the production cycle and increase production costs.
Shield Reinforcement Ring,Tunnel Reinforcement Ring,Shield Tunnel Ring,Concrete Surface Of Ring
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com