Pump is easy to operate, safe, just press the button, turn on the power, it began to work, in order to ensure that the pump can work better, but also pay attention to some places. Xiaobian now come and talk to you about the correct operation of the rotor pump. Rotor pump rotor pump correct steps 1, before the pump: First check whether the intact pump parts, out of the valve on the pipeline are all open, in short, must ensure that the parts intact, the pipeline open. 2, when you open the pump: you must let it start the next process of equipment work, and then, to start the pump. 3, in the course of operation, should always pay attention to the action is normal, such as found before the pump cut off or blockage and other phenomena, should be promptly shut down, remove the fault and then boot. 4, when the entire line to stop working, according to the process in turn downtime, that is, after the pump stopped, then stop the pump behind the relevant equipment. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)
Ruidi 120,Panasonic Automatic Door,Panasonic Automatic Sliding Door Operatormotor,Panasonic Automatic Door With Sensor
Caesar door control co.,ltd , https://www.caesar-door.com