When people buy a hood, they always face such a choice. Whether the side suction of the hood is better or the top suction is better? The top suction hood is a more traditional style, while the side suction hood is new in recent years. Products, the price relative to the top suction to a lot more expensive. Next small series for everyone to introduce the side of the hood suck good or top suction and hood buy error.
Good side suction or top suction
1, the advantages of side suction hood
a, do not drop without oil
Because the side suction type hood is designed with a slope, the side suction type hood will not appear to meet and drip.
b, good pumping effect
Because the side suction range hood is very close to the cooktop, the smoke can be locked for the first time, and no flame is drawn from the side inlet, and no gas is wasted.
c, can achieve soot separation,
Side-suction range hoods use soot separation panels to separate the oil fumes. The oil stains will not enter the interior of the fume hood and the interior cavity is free to wash, but the fume panel needs to be cleaned.
2, the advantages of top suction hood
a, good smoke exhaust
Direct suction (top suction) range hood technology is relatively mature, smoke exhaust effect is better, while the price is relatively low.
b, style, atmospheric fashion
Direct-suction range hoods are designed in various ways and are generally large in size and strong in texture, and can be integrated with other kitchen appliances.
Hood machine to buy errors
1. The greater the power, the better the effect of oil fumes
The promoters often take the power to make a fuss, saying that the greater the power, the better the effect of the oil fumes, which is a major misunderstanding. In fact, the power is not necessarily linked to the effect of smoke absorption. If a range hood is only of high power, but the turbine is rough, the motor is not manufactured, and the quality of the inner cavity is also poor, it is often only dry electricity, but it is not good enough. Effect.
2, the material of the panel does not matter
With regard to the panel material, the promoters may “forget to forget†and not mention it, or simply say the name of a certain alloy to bluff the consumer. In fact, the hood material is very important, imagine, a range hood, every day to contact all kinds of soot, spices and other acid-base corrosion, may not be visible in the short term, but half a year or so later will occur such as fading Problems such as fumes and fumes. In fact, to inspect the material is also very simple, the best domestic material is generally imported M-Cr stainless steel material, looks fine texture. This material is resistant to oxidation, corrosion and will be brighter and brighter. To distinguish the difference between this material and the general alloy material, it is only necessary to directly use the magnet to test it. If it can be sucked on, it must be a general inferior alloy or iron type. The steel material cannot be sucked on.
3, cavity design is not important
The importance of the interior design of the range hood can not be ignored, on the one hand to be as seamless as possible, easy to clean, but also to protect the circuit, so that the various lines can work normally under the strong corrosion conditions of soot, not Corroded. The seamless design inside the cavity is not only seamless in the cavity, but also the small face that is parallel to the stove top can be seamless, and at the same time, the oil mesh and the inner cavity should also be made to be “invisible seamlessâ€. "For example, to set up oil walls, etc., this is really not to leave a clean corner."
4, there is no dismantling function can be dismantled
Absolute hood-free washing and washing is not possible. After a hood has been used for one year, it must be removed or washed. Otherwise, the effect of the oil-absorbing fumes will be seriously affected by the attachment of the turbine and the inner fume. Therefore, a hood can not be unlimited "free washing," and should be designed as "washable", after a year, you can remove the oil nets at home, turbine cleaning, that is really easy to clean.
Editor's summary: on the side of the hood suction or top suction and hood buy error introduced on here, and hope to be helpful to everyone. Want to learn more related knowledge can focus on this site information
Top suction hood side suction range hood range hood range hood home side suction or top suction good
Shower Faucet System,Concealed Bath Shower,In-Wall Black Shower Faucet
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.kpjenorsanitary.com