2, 2'-((3, 3'-Dimethoxy(1, 1'-biphenyl)-4, 4'-diyl)bis(azo))bis(3-oxo-N
-phenylbutyramide)
C. I. P. O 16
CAS No.: 6505-28-8
EU No.: 229-388-1
C. I. NO.: 21160
Molecular Formula: C34H32N6O6
2. Specification:
Fastness:
Light: 5
Heat: 150
Water: 5
Linseed Oil: 4
Acid: 3
Alkali: 4
Oil absorption: ≤ 55
3. Application: For inks, plastics, and paints industry
Technical Data Sheet(TDS)
Â| 1. | Product Information | |
| 1) Product name | Suncolor Orange 1216 | |
| 2) Color index name | Pigment Orange 16 | |
| 3) Chemical type | Disazo | |
| 4) Molecular formula | C34H32N6O6 | |
| 5) CAS No. | 6505-28-8 | |
| 6) EU No. | 229-388-1 | |
| 7) Relative trade name | Permanent Orange R | |
| 2. | Physical Properties | |
| 1) PH Value | 7 | |
| 2) Specific gravity | 1.50±0.1 | |
| 3) Water soluble | 1.0% max | |
| 4) Oil absorption | 45±5% | |
| 5) Heat stability | 200 Degree C | |
| 6) Resistance to Water (1-5) | 5 | |
| 7) Resistance to Oil (1-5) | 5 | |
| 8) Resistance to Acid (1-5) | 4 | |
| 9)Resistance to Alkali (1-5) | 4 | |
| 10) Light fastness (1-8) | 7 | |
| 11) Weather fastness (1-5) | 4 | |
| 12) Migration resistance | 3 | |
| 13) △E | ≤1.0 | |
| 3. | Application | ||
| 1) Plastics | -- | ||
| 2) Coating | Water based paints, industrial paints, solvent paints, powder coating | ||
| 3) Inks | Waterbased ink | Â | |
| Offset ink | Â | ||
| 4) Textile paste | textile paste | ||
| 4. | Technical comments | ||
| Pigment Orange 16 often used for Water based paints, Waterbased ink and Offset ink, also can be used for solvent paints, powder coating and textile paste. | |||
SILCA MACHINE KEY CUTTERS
Product Features
1. Material: Ultra-high hardness and high wear-resistant carbide material from Sweden, the ultra-fine particles ,good wear resistance;
2. Manufacturing process: Fully automated grinding center mirror polishing, sharp edge, low cutting noise;
3. Features: accurate size, cutting edge size accuracy of 0.005mm, high precision of cutting key size; sharp cutter edge;
4. Advantages: Sharp, can cut brass keys and nickel silver keys, smooth edges, no burrs;
5. The tracer point is made of carbide, it has good conductivity, which is not bent, ensuring accurate detection, and will not damage the accuracy of the fixture and the spindle;
Suit for Machine: electronic key cutting machines, such as Viper,QUATTROCODE,TRIAX QUATTRO,TRIAX-e.code,KABA ILCO TRICODE HS
Suit for processing keys: All inner milling slots and outer milling slot keys, suitable for processing nickel silver keys, which can efficiently process original and high-hardness key blanks, such as Honda original keys, STRATTEC key blanks, etc.
Silca Machine,Flat Slotter Delta,Delta Flat Slotter,Mircle Key Cutters
ZHANGJIAGANG KEYCUT CO.,LTD , https://www.keycutblade.com