General Description of PVC Resin
CAS No. 9002-86-2
Polyvinyl Chloride or PVC resin SG3, SG5, SG7 and SG8 are homopolymers made by suspension polymerization. PVC resin is white powder form thermoplastic resin and has great versatility for making plastic products.
| Parameter | Grade | ||||
| Standard: GB5761-1993 | SG3 | SG5 | SG7 | SG8 | |
| K -Â Value | 72 -Â 71 | 66 -Â 68 | 62 -Â 60 | 59 -Â 55 | |
| Polymerizing Index | 1300 +/-50 | 1000 +/-50 | 800 +/-50 | 700 +/-50 | |
| Number of impurity particles       ≤ | 16 | 16 | 20 | 20 | |
| Volatile content (incl. water) %     ≤ | 0.3 | 0.4 | 0.4 | 0.4 | |
| Apparent density                 ≥ | 0.42 | 0.48 | 0.48 | 0.5 | |
| Particle size | ≥ 0.25mm     ≤ | 2 | 2 | 2 | 0.4 |
| ≥ 0.063mm   ≥ | 95 | 95 | 95 | 95 | |
| Number of Fish Eye (/400 cm2)   ≤ | 20 | 20 | 30 | 30 | |
| Plasticizer absorption of 100g resin ≥ | 26 | 19 | 12 | 22 | |
| Whiteness (160°C, after 10 min.) % ≥ | 78 | 78 | 75 | 75 | |
| VCM Residue PPM              ≤ | 5 | 5 | 5 | 5 | |
Techenical Data of PVC Resin
1.GENERAL DESCRIPTION:
It is a fine, white, odourless powder, that is obtained through the polymerization of vinyl chloride suspension.
2.TECHNICAL QUALITY CONDITIONS:
| Properties of PVC | Typical value | |
| Polymerization Degree | 1030 +/- 50 | |
| K-Value | 66 +/- 1 | |
| Bulk Density (g/ml) | 0.55-0.58 | |
| Volatile Matter (%) | 0.3 Max | |
| Particle Size: | 60 Mesh≤ | 2.0 |
| 230Mesh≥ | 95 | |
| Apperance | White Fine Powder | |
| Vinyl chloride residue, max | 1 PPM | |
Â
Main Usage of PVC ResinÂ
Our pvc resin is recommended for formulating vinyl rigid compounds suitable mainly for processing by extrusion (of rigid pipes and fittings, tubes and plates, window profiles and other profiles or outdoor furniture with weatherability, siding,etc.) injection of rigid profiles and calendering of rigid sheets.Â
SG3 is for films, hoses, leathers, wire cables and other general purpose soft products.
SG5 is for pipes, fittings, panels, calendaring, injection, moulding, profiles, and sandals
SG7 /Â SG8 is for bottles, sheets, calendaring, rigid injection and moulding pipes.
Â
3.PACKAGING-STORAGE:Â
It is packed in:Â
25kg net bags of polypropylene lined with polyethylene, (permissible limits ± 0.2kg).valve papebags, 25kg net (permissible limits ± 0.15kg), palletized and wrapped with polyethylene film.
The product should be stored in cool, dry and well vented areas far from inconsistent materials. Polyvinyl chloride presents the risk of electrostatic energy storage, that is why the storage silos are earthed.
FAQÂ
China PVC resin
1)Can you find our products in your country?Â
Our products export to Korea, South America, Africa, Australia , Europe, Canada , Middle East, India,Pakistan and so on.
 We can supply the shipment documents for your reference if you need .
2)How effective and professional logistics service?
1.For general cargo,it can ship prompt.
2.For commodity inspection cargo,it need around 2Â weeks to do inspection.
3.For dangerous cargo,it need around 2Â weeks to do dangerous package licence.
3)How can guarantee the loading?
 We have our own workers in port to inspection of loading
4)When can give shipping documents?
We can give customers the shipping information at any time.
Contact:
Mob +86 18134733269
Â
Â
General Description of PVC Resin
CAS No. 9002-86-2
Polyvinyl Chloride or PVC resin SG3, SG5, SG7 and SG8 are homopolymers made by suspension polymerization. PVC resin is white powder form thermoplastic resin and has great versatility for making plastic products.
| Parameter | Grade | ||||
| Standard: GB5761-1993 | SG3 | SG5 | SG7 | SG8 | |
| K -Â Value | 72 -Â 71 | 66 -Â 68 | 62 -Â 60 | 59 -Â 55 | |
| Polymerizing Index | 1300 +/-50 | 1000 +/-50 | 800 +/-50 | 700 +/-50 | |
| Number of impurity particles       ≤ | 16 | 16 | 20 | 20 | |
| Volatile content (incl. water) %     ≤ | 0.3 | 0.4 | 0.4 | 0.4 | |
| Apparent density                 ≥ | 0.42 | 0.48 | 0.48 | 0.5 | |
| Particle size | ≥ 0.25mm     ≤ | 2 | 2 | 2 | 0.4 |
| ≥ 0.063mm   ≥ | 95 | 95 | 95 | 95 | |
| Number of Fish Eye (/400 cm2)   ≤ | 20 | 20 | 30 | 30 | |
| Plasticizer absorption of 100g resin ≥ | 26 | 19 | 12 | 22 | |
| Whiteness (160°C, after 10 min.) % ≥ | 78 | 78 | 75 | 75 | |
| VCM Residue PPM              ≤ | 5 | 5 | 5 | 5 | |
Techenical Data of PVC Resin
1.GENERAL DESCRIPTION:
It is a fine, white, odourless powder, that is obtained through the polymerization of vinyl chloride suspension.
2.TECHNICAL QUALITY CONDITIONS:
| Properties of PVC | Typical value | |
| Polymerization Degree | 1030 +/- 50 | |
| K-Value | 66 +/- 1 | |
| Bulk Density (g/ml) | 0.55-0.58 | |
| Volatile Matter (%) | 0.3 Max | |
| Particle Size: | 60 Mesh≤ | 2.0 |
| 230Mesh≥ | 95 | |
| Apperance | White Fine Powder | |
| Vinyl chloride residue, max | 1 PPM | |
Â
Main Usage of PVC ResinÂ
Our pvc resin is recommended for formulating vinyl rigid compounds suitable mainly for processing by extrusion (of rigid pipes and fittings, tubes and plates, window profiles and other profiles or outdoor furniture with weatherability, siding,etc.) injection of rigid profiles and calendering of rigid sheets.Â
SG3 is for films, hoses, leathers, wire cables and other general purpose soft products.
SG5 is for pipes, fittings, panels, calendaring, injection, moulding, profiles, and sandals
SG7 /Â SG8 is for bottles, sheets, calendaring, rigid injection and moulding pipes.
Â
3.PACKAGING-STORAGE:Â
It is packed in:Â
25kg net bags of polypropylene lined with polyethylene, (permissible limits ± 0.2kg).valve papebags, 25kg net (permissible limits ± 0.15kg), palletized and wrapped with polyethylene film.
The product should be stored in cool, dry and well vented areas far from inconsistent materials. Polyvinyl chloride presents the risk of electrostatic energy storage, that is why the storage silos are earthed.
FAQÂ
China PVC resin
1)Can you find our products in your country?Â
Our products export to Korea, South America, Africa, Australia , Europe, Canada , Middle East, India,Pakistan and so on.
 We can supply the shipment documents for your reference if you need .
2)How effective and professional logistics service?
1.For general cargo,it can ship prompt.
2.For commodity inspection cargo,it need around 2Â weeks to do inspection.
3.For dangerous cargo,it need around 2Â weeks to do dangerous package licence.
3)How can guarantee the loading?
 We have our own workers in port to inspection of loading
4)When can give shipping documents?
We can give customers the shipping information at any time.
Contact:
Mob +86 18134733269
Â
Â
Tool Handle,Floor Burnisher Handles,Customized Stainless Steel Handle,Customized Tool Handle,Dust Extractor Handle
MGX Metalworks Co., Ltd. , https://www.mgxmetal.com