Pick the true character of the tile

one look

Mainly to see whether there are black spots on the surface of the tile, bubbles, pinholes, cracks, with or without scratches, stains, missing edges, missing corner tiles also pay attention to whether there is leakage, leakage grinding and other defects. Check the bottom embryo trademark mark, the regular manufacturer's product bottom embryo has a clear product trademark mark, if not or is particularly vague, it is recommended carefully selected!

Second, you

That is, the weight of the ceramic tile, the feel of the ceramic tile, the quality of the same specification product, and the high density brick feel are relatively heavy. On the contrary, the quality of the product is lighter.

Third, listen

By tapping on the tiles, you can identify the quality of the tiles by listening to the sound. Here are two aspects of the kitchen and floor tiles and glass tiles:

Tap method:

1), wall tiles or small size tiles

Usually one finger is separated by five fingers, holding the tile, and tapping the tile face with the other hand. If the emitted sound is metallic, the quality of the tile is better.

2) Floor tiles (bathroom tiles or antique tiles used in the living room and other floors)

With a tiled hand on one side, tapping the middle of the tile with the other hand's palm, if the sound is thick and the echo is long, such as tapping the sound of a bronze bell, the porcelain is highly porcelain and wear-resistant. Strong, high flexural strength, low water absorption, less susceptible to contamination, if the sound is turbid, there is no echo, then the degree of porcelain is low (even cracks), the ceramic body of the tile is not fully calcined, the wear resistance is poor, and the flexural strength is low The water absorption rate will also be higher, and such vitrified tiles are highly susceptible to contamination.

Fourth, fight

The same specifications and models of the product can be randomly taken out of the four, for patching, through this step you can check the tile size, flatness, straight angle and other aspects of the three issues.

Fifth, try

As long as it is against the anti-slip problem of tiles.

Tiles Tiles Floor Tiles Antique Tiles Tiles

Top-mount Sinks

Drop-in kitchen sinks, also called self-rimming sinks, overmount sinks, or top-mount sinks, are sink basins that install and sit on top of your kitchen counter. There is a visible rim or lip on the perimeter of the basin that rests just over the cut-out for the sink. Drop-in sinks are supported by this lip and a series of hidden clips that attach to the underside of the countertop.

The Advantages of Drop-In Sinks

Drop-in sinks have some clear advantages over other styles, especially in the kitchen.

Cost

They`re generally cheaper to buy and easier to install than undermount sinks. In fact, even weekend warriors and DIY newbies should have no problem installing a basic overmount sink. If cost is a consideration in your kitchen, an overmount sink with a do-it-yourself install is a great way to stay within budget.

Cleaning

While cleaning may not be your foremost concern when choosing a kitchen sink, it should be considered. After all, you`ll have to care for and maintain your sink regularly. The basin of an overmount sink is easier to clean than the basin of an Undermount Sink.

Protection

If you`ve got soft countertops, drop-in sinks can help protect the edges of the sink cutout.

  • Marble and some specialty counter finishes benefit from the added protection provided by the lip of a drop-in kitchen sink basin. It prevents the build up of water on the surface edges of the stone through repeated exposure of use.
  • If you have laminate countertops, drop-in sinks are the only option: the particle board below the laminate surface isn`t strong enough to support undermount sinks but plays well with self-rimming basin types.

Top-Mount Sinks,Top Mount Kitchen Sink,Top Mount Stainless Steel Sink,Black Top Mount Sink

Guangdong Huayou Hardware Products Co.,Ltd , http://www.gudsink.com