Patrol inspection system use tips

The patrol rod and patrol point are made of all-metal materials, with a service life of more than 15 years. It is resistant to high temperatures, not open flames, corrosion, acid and alkali, electromagnetic interference, damage, rain and snow. Disadvantages, patrol bar and patrol point need to be touched lightly every time the card is read. The patrol bar and the patrol point can reach more than 1 million times of friction and wear after normal use requirements!

The origin of patrol inspection products?

A long time ago, patrol personnel recorded patrol work through traditional check-in methods. Today, a scientific, objective, rigorous, and high-tech method is used to implement a set of best solutions for patrol management. The traditional patrol is based on the patrol personnel through manual recording, install a box like a mailbox (patrol point) in the place where the patrol is needed, and each patrol officer writes his arrival on the paper when he arrives here Time, name and related information, and then put in the box. The manager usually inspects the work attendance of the patrol officer by checking the small note in the box.
With the development of society and the advancement of technology, the American DALLAS company launched the global patent "IBTTON" information button in the 1990s. This product has many advantages such as ruggedness, acid and alkali resistance, corrosion resistance, high temperature resistance, and long service life. It is applied to patrol inspection products, see Jian (performance comparison of information button). Due to its many superior performances, contact electronic patrol inspection products are still the mainstream of global patrol products.

Why is it said that "strong and durable" is the importance of patrol inspection products?

Due to the special application of patrol inspection products, it is very different from other security products. It is a product used to manage and supervise patrol personnel, and is extremely vulnerable to strong confrontational psychology of users. In some work environments where the management methods are not strong, the patrol personnel will use deliberate means such as drop, water spray, fire, high and low temperature, electromagnetic interference and other deliberate destruction to cause the machine to not be used normally. Therefore, when designing patrol products, the factors should be taken into consideration as far as possible, patrol rods and patrol points should be stronger, more durable, and more stable (the structural drawing of 9000P and 9000A). Of course, patrol products are not absolutely not afraid of man-made destruction. To make their use stable, it also requires managers to educate patrol personnel, and the manufacturer's free service for a long time, "5 years of free service."

Why do patrol inspection products implement "5-year free warranty" to users.

Since the first domestic patrol inspection product was produced in 1998, it has not only won the trust of users in terms of technology and quality, but also has become the first choice in the market. From the beginning of the R & D and production of electronic patrol inspection products, the company has taken into account the factors of man-made destruction in the actual use of the product, and added technical functions to make the patrol machine stronger, more durable, more waterproof, and It can record the personnel, time, and location of the patrol machine when it is hit or shocked to distinguish responsibilities. Seven years of patrolling, inspection, research, development and production experience tells us that these are not enough. Electronic patrol product Since it is a special security product, its after-sales service should also be very different from other products. The after-sales service requirement is to repair the user's patrol product in the first time, so as not to cause The patrol inspection work is interrupted (even if it is man-made destruction).

The patrol inspection market at home and abroad has always been, why do users still use the "TM card contact" card reader patrol inspection products as the first choice?

The patrol inspection system is mainly divided into two types: offline and online. The offline type is mainly based on the TM card contact type, and there are also RFID induction type and barcode type.
TM card contact type-more than 15 years of production history, because of durability, low failure rate, anti-destruction, long battery life and other advantages, it has been the mainstream product in the global patrol market, with the metaphor of "all-weather all-round patrol" . The patrol rod and patrol point are made of all-metal materials, with a service life of more than 15 years. It is resistant to high temperatures, not open flames, corrosion, acid and alkali, electromagnetic interference, damage, rain and snow. Disadvantages, patrol bar and patrol point need to be touched lightly every time the card is read. The patrol bar and the patrol point can reach more than 1 million times of friction and wear after normal use requirements!

RFID induction --- you can bury the patrol point shallowly into the wall (only for non-metal, if you want to install it on the surface of metal objects, you can only paste it). It has the advantages of no contact for card reading, waterproof and sealed, durable and anti-fall. The disadvantage is that the patrol stick card reader and the patrol point are made of plastic material, especially the service life of the induction patrol point is short, so it is recommended to apply it in a place with a better environment. The patrol point should not be installed naked. Especially in the petroleum, chemical industry, metallurgy, electric power, coal, railway and other industrial environments, once exposed and installed on the surface of the equipment, high and low temperature, corrosion, electromagnetic interference, man-made damage, etc. will make its damage rate extremely high! To cause unnecessary trouble and economic losses to the user.