(1) Laser melting cutting
Like laser deep-fusion welding, a laser is used to heat a workpiece to melt it, and then a non-oxidizing gas is sprayed to remove molten material to form a slit. Most metal materials are cut into such cuts.
(2) Laser gasification cutting
When a high power density laser is applied to the surface of the material, the material is heated to a vaporization point in a very short time and escapes as a liquid or solid particulate by gas or gas impact to form a slit. Since the material has a large heat of vaporization, it is often cut with a non-metallic material.
(3) Laser combustion cutting
The laser heat is used to heat the workpiece to its ignition point, and then it is burned with an active gas (such as oxygen, air), and the combustion products are removed to form a cut. The principle is similar to oxygen cutting, except that a laser is used as a preheating heat source. This method is mainly used for cutting metal materials such as steel, titanium and aluminum.
Because the laser spot is small, the slit is thin. Generally, the width of the carbon steel slit can be as small as 0.1~0.2mm. The two sides of the slit are parallel and perpendicular to the surface. Generally, it can be directly used after cutting. The heat affected zone is only 0.01. ~01mm, and the deformation is small. High-speed cutting can be achieved, but at present, only medium and small thickness materials can be cut due to laser power and equipment volume limitations. Moreover, as the thickness of the workpiece increases, the cutting speed drops significantly.
LEDER technology`s LED High Bay which designed with durability and functionality in mind, the LED round high bay lighting options are versatile and suited to satisfy most long-term lighting needs.Designed for ceiling heights and higher the light output will replace a fixture. The Cool light color is an excellent balance between brightness and comfort.
This high bay is perfect for plaza, basements and many other areas. The fixture makes for easy installation, while the LED High Bay ensures long-lasting, energy-efficient service.LED High Bay Light's 0-10V dimming function allows flexibly adjustable brightness protects your eyes against irritation by high-output lights, making it suitable for different needs.
Features:
• Quality Assurance
• Efficient heat dissipation
• High quality and the stable voltage
• Using SMT surface patch technology, greatly improve the thermal conductivity
• Steady electric function, saving the energy and power
• Color temperature :3000k-6000K
• Intelligent constant current IC driver
• Type of protection: IP65
• Warranty:3 - 5 years
This set of LED High Bay light is designed to replace low and high bay fixtures in large commercial areas, warehouses, factories, and larger residential garages and other large areas that require great lighting.We have rich production experience in lighting. Except LED High Bay Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light , Track Light , Linear Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
LED High Bay,High Bay Lights,LED Warehouse Lighting,High Bay LED Shop Lights
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightindoor.com